Yahoo Answers is shutting down on May 4th, 2021 (Eastern Time) and beginning April 20th, 2021 (Eastern Time) the Yahoo Answers website will be in read-only mode. There will be no changes to other Yahoo properties or services, or your Yahoo account. You can find more information about the Yahoo Answers shutdown and how to download your data on this help page.

Trending News

Promoted
Amarjargal
Amarjargal asked in Computers & InternetHardwareDesktops · 9 years ago

my newly built computer wont boot up PLEASE HELP?

i bought

http://www.newegg.com/Product/Product.aspx?Item=N8... -G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-8GBRL

http://www.newegg.com/Product/Product.aspx?Item=N8... -AMD FX-4100 Zambezi 3.6GHz (3.8GHz Turbo) Socket AM3+ 95W Quad-Core Desktop Processor FD4100WMGUSBX

http://www.newegg.com/Product/Product.aspx?Item=N8... -ASUS M5A97 AM3+ AMD 970 SATA 6Gb/s USB 3.0 ATX AMD Motherboard with UEFI BIOS

http://www.newegg.com/Product/Product.aspx?Item=N8... -Rosewill CHALLENGER Black Gaming ATX Mid Tower Computer Case, comes with Three Fans-1x Front Blue LED 120mm Fan, 1x Top 140mm Fan, 1x Rear 120mm Fan, option Fans-2x Side 120mm Fan

http://www.newegg.com/Product/Product.aspx?Item=N8... -XFX FX-775A-ZNP4 Radeon HD 7750 Core Edition 1GB 128-bit GDDR5 PCI Express 3.0 x16 HDCP Ready Video Card

http://www.newegg.com/Product/Product.aspx?Item=N8... -Rosewill Xtreme Series RX750-S-B 750W Continuous @40°C ,80 PLUS Certified, ATX12V v2.2 & EPS12V v2.91, SLI Ready CrossFire Ready, Active PFC Compatible with Core i7, i5 Power Supply

i already had a hard drive and optical drive

i assembled everything together, then when i pressed power button the fans and stuff turned on there was green light on the mother board, and it had red mem ok lights.

but isaw NOTHING on my monitor.

i have hp monitor

what should i do?

there is no slot on the video card to plug my pcie psu connector

I am getting tired of my sucky compaq presario m2000, its hella slow

3 Answers

Relevance
  • Admin/Tech
    Lv 6
    9 years ago
    Favorite Answer

    The monitor should say "NO signal" if your set to the right connection & have a cable in the port

    CHECK the setting on the monitor to make sure your on the right one. VGA to DVI or HDMI (what ever your using).

    Some have both a manual & automatic setting that's why I mention it

    The extra plug from the psu is only in case you have a video card with a power connector.

    Obviously that card doesn't need one ,so your choice of card is fine

  • Lu
    Lv 5
    9 years ago

    Try plugging in your monitor to another port on the back of the graphics card regaurdless of what the users manual states to do. In fact read the user's manual for the graphics card installation that might help if you did not. If you have a vga monitor it will be a different port then the suggested because the graphics card supports hdmi and mini hdmi that really what it wants. So if it is vga plug into a different dvi port. If it is hdmi use the hdmi to mini hdmi port adapter and try a mini hdmi port. Unplugging and turning off the computer from the power supply switch each time if you have such a switch on the power supply unit its self.

  • kurniawanirawan
    Lv 6
    9 years ago

    Your vga need to have extra power from psu. You should see a power plug on the other end of the card.

Still have questions? Get your answers by asking now.