C B C

If you went hiking with your good friend of 10+ years on a 10+ hour hike on a mountain with his new girlfriend. What would you think of him if he and his girlfriend leaves you behind by yourself in the dark with on small flash light on a mountain and about 2-3 miles to go to the parking. Would you consider someone like that a friend?

I am looking for a software that will track passwords and any writing done on my computer. I want to make sure my child is safe while in her social media like facebook and emails.

Thanks

So I bought a new tire for my back passenger (bubble in the low profile tire), the other back is couple months old (changed for the same reason, bubble). So I got the alignment done and it still pulls to the left even before I changed tires. I called and they said the car will pull because I put 1 new tire. I understand if you have 1 new 1 old in the front it will make a difference but what about the back.

1) The pulling to the left was always there, go new tires, still pulled when to get it aligned and changed the back tire and they said it will always pull. Is this true?

2) California: I have a cracked rim that was repair recently and the tire is fairly new but since the shop says I need two new tires instead of one (the one with the bubble was changed and car aligned) but they won't give me a new tire cause the rim is cracked (repaired) because he said it's against the law to changed a cracked/repaired rim. Is this true?

Note: I can't find a replacement rim. It's a 20x9 OEM and I've called tons of people and they are out of stock so i had to repair the rim until I can find another one. And NO, the spare is a donut not full size.

Question: a) Does the alignment not work if you have one newest tire on passenger rear even though other tires are couple of months old.

Shouldn't the shop have told me NOT to do the alignment because it won't work with one back new tire and we won't change the other back?

Any opinion on alignment

Thanks

Does anyone know a website where I can hire someone to have DWGs files imported to SketchUp and drawn to a 3D?

My fiance's good friend who is now single (divorced) talks about the social websites (dating sites) he is on and all the women he meets and sleeps with and all the X rated stuff they do. Sends my fiance photos of the girls etc. I asked him to take it down a notch when I am with them and he said it was none of my business and it's not his fault I am insecure about my relationship.

Question: State if you are male (M) or female (F) when answering: Is it inappropriate that his friend talks about all his shenanigans in front of me? And is it inappropriate that I asked him to take it down a notch?

I have these indoor rails that I hate and want to remove without doing so much damage to the existing tile. I don't know if it's grout or cement. But what is the best tool to remove these? Home Depot gave me like a flat head screw driver (concrete chisel) but it's just not working great. Any advice

Photos:

http://www.bluemelon.com/photo/4142630.jpg

http://www.bluemelon.com/photo/4142631.jpg

http://www.bluemelon.com/photo/4142632.jpg

http://www.bluemelon.com/photo/4142633.jpg

I need to do some Spackle work to fill in large sections by a window. Is there really a big difference between using Spackle and non sanding Spackle?

Any suggestions for best way to repair

http://www.bluemelon.com/photo/4087298.jpg

http://www.bluemelon.com/photo/4087299.jpg

Does anyone know how to use the apple airport express as an extender? I have a PC with a Netgear N900 wireless router and need to use the extender downstairs to give it a boost

Thanks

(step by step please)

I need to look up 2010 and 2011 daily weather reports, where can I find this

thanks

If the donor egg blood type is 0+, father (sperm) is 0+ and the female caring the fetus B+, Would the blood type still end up as only O+, O- even though Blood type B+ is the birth mother?

I am in safe mode on my Laptop PC. Can't seem to use my computer in regular mode, i.e. internet or other programs as if frozen or doesn't open. I can do things in Safe Mode but not regular. When booked to regular this comes up "Netgear USB Control Center failed to creat a firewall rule. Please configure the firewall manually by adding exception for the following port: 7423 (UDP out port)." Also I can't do a shut down or restart in regular mode so I have to use the power key to shut down.

Also I did a System Restore but it only gave me 3 choices even though I clicked on the box to show more and it didn't. I did a system restore and still this comes up and still not working.

Any advice?

Thanks ahead of time.

(I don't have a disc for my Netgear. I don't remember if it came with one but if it did, I don't have it.)

If an artist made silver from the 40s and the 60s, would the value be different if the silver is almost identical?

So I have a home office that is roughly 9x10, one window on two sides. The eames desk is colorful (see link for a sample) so I would like to take a plain office and add color. What colors would you paint it and how?

I.E. accent wall, strips, blocks, strip from one wall across the ceiling to the other side etc.

Thanks

Charles & Ray Eames ESU desk

http://www.icollector.com/Charles-Ray-Eames-ESU-de...

here is a copy of the original, colors are slightly different in the copy then what I have

http://www.roomandboard.com/rnb/product/detail.do?...

I live by the beach (not on the beach though). I plug my computer speakers into the wall electrical outlet and when I turn it on through a switch (without having sound) you can hear static or noise. I first had plugged it into a surge protector along with my computer, scanner, printer etc. I had interference too but a different sound, more like a pumping sound. So I moved it from a surge protector to an outlet not being used. Now I hear a crackling, static noise sound coming from the speakers. Is there something wrong with my speakers or the wiring?

(I had this plugged in at another house and didn't have these problems)

Thanks

Hi have an old Automatic Doorman Model 455 and I couldn't find the code reset button on the unit to change the code. I can program a remote easily with today's garage door openers but can't find button to change the code. Does anyone know?

No I didn't see it in the cover by the light and no I didn't see it in the back. Please comment if you are family with this unit. Thanks!

What can you buy your secretary who is old, lazy, I can't stand, would like to fire but can't. She doesn't answer my phones, doesn't like to do anything. I've missed calls and meeting because she didn't put it in my schedule etc. I feel obligated to buy something for Christmas (LATE) but who cares it's late.

Serious answers only. Spending about $200.00. I want to pretend I like her because I feel obligated to buy something as she bought me some stupid candy.

I remember finding a place, 1 place in West Los Angeles, that sold replacement covers for fluorescent light covers. I have several broken covers of different sizes and remember calling someone who had them but lost the address. Does anyone know where I can be the COVERS Only and not the whole light?

Thanks

I have the same argument with my fiance, who owes who.

Do parents owe you to be self suffient and live within their means or do you owe them money to support them when they live outside their means?

So I posted before and the answers I got was not helping. Someone was help off YA but lost touch. So I am posting again.

Our sprinklers were working fine. Then it stopped. What I mean is the heads were not popping up but water just pouring out from the slight pop up of the heads. We changed the valves and still nothing. If we turn the screw on the valve the heads work fine but as soon as you tighten them it doesn't work.

Help. I will answer any questions for more details.

So I have 11 zones and valvues. For some reason one zone doesn't have enough pressue, it use to work. We changed the valve and it didn't seem to change things. All the other zones work fine. Any recommendation.