Dan & Lety K

The Pastor the did our wedding this past weekend sighed a box that wasn't suppose to be sighed then crossed it out. We went to turn it in and it was rejected. Now we have to go pay an additional $95 and make multiply trips back and forth between church, friend and county reporters office to get all the necessary signatures and processing. What would you do?

ok, so here are some details to this car, for some background info.

Bought used with 133200 miles on it. It is a 02 chevy trailblazer. When bought it, temp was at about 220-225. Figured it was just in need of a flush and thermostat. Well I had flushed the the radiator, with no thermostat 2 weeks ago, I ran a engine flush solution in it as well it dropped from 220 to 215. The next week I did the thermostat and it dropped the temp to 210 and a little below. no the temp fluctuates ever so slightly with i drive or sit parked. IT does not go above 210 at all. The fan does work and kicks in when it should. I turned the heater on high after the last time, and car just shut off. will not stay on with out the accelerator being pressed down. I drove it, it did stay on, but when i stopped it acted like it wanted to shut off. A few days later I turned the A/C on and it car stayed on, came to a stop a few times it stayed on, then then last couple stops it started to idle rally low at stop then just shut off.

We used the car a few times prior to the work being done, Ran the car with both a/c & heater on high and it didnt shut off. so just wondering why It would be doing this. Any help is appreciated. thanks.

I also did air filter, fuel filter, and plugs. all these were done before the car started shutting off with the AC/heater. They didnt seem to be any effect to it.

ok, so i have a question about properly fusing the setup i am designing.

im gonna be running 4 amps (400 amps total) and some processors and other crap, id say about another (20 amps total)

im gonna run 2 runs of 0 gauge to the back, and i know that its only safe to run about 350 amp fuse on a single run of 0 gauge, so i 2 runs and run a 250 or 300 amp fuse on each line will that work and no blow them out beause there being split competely or what.

basicly im gonna have 2 runs of 0gauge going from the al to front for big 3 then 2 from front to back battery then from back battery to distribution block and then to accessies and amps.

OK so I bought an Audiocontrol overdrive new suposably. Bought on eBay from a known company but didn't ever test it until now and its after the return period.

But the problem is I plugged it in and all the LEDs are lit up and it is overly distorted. There is no level control or anything. Opened looks OK see no visible damage what could be possible problem and is it possible to send to audio control for repair

OK so I'm kinda sitting at a dilemma right now. I bought my mid range woofers and there freq response is 85hz to 5khz I know I can use my amps hpf to cross the low end at 90hz but is it OK to just run them on HP And run freq above 5khz into them or will it damage them or what can use to jut get the 85-5khz from them only. Thanks.

I'm new to trying to run multiple amp setup. Should I add that I have 8 mids going in on 2 different amps. Also tweeters are being ran on an additional amp as well as subs

I currently have a CDL in CA, with doubles/triples and tank. I want to add hazmat and i would like to sart trying to find a job somewhere else where now. My license expires in july, can i just go take that test and add it with out having to take all the test over again or do i have to do them all over again.

Im just in the processs of finally designing and build materials and parts for a spl system. and well i need software so i can start figuring out my truck space,and box design wanna run threw a few different setups.

What is the difference between the aq and sq is it just the logo or they just as good

Which is a better buy, i see they run close to the same price, but which runs cooler, and which is thicker. I know they are both CCA wire as well.

Is it ok to run a set of 8" mids on the same channel as a set of 6" mids? I wanna run 4-8" and 4-6" but can't I safely do it with a4 channel amp. Thee amp puts out like 250 watts rms at 2 ohms the mids are 4 ohms each and the 6's are100 watts rms and the 8's are 125 rms. They are the same brand as well. I would like 1 of each in each door and actuaally be able to use the amp for leftand right front and back how it should be

I'm looking into buying to sundown sa 15's what would be the best amp for them. Also wanna be able to run matching amps for mids and highs

What would you ask as far as price for what is alreaxy put together for this ar 15.

It has Smith and Wesson stripped lower, dpms parts kit, mag pul stock, trigger guard, grip and magazine all in fde, core 15 fde charging handle and a stripped palmetto state armory stripped upper.

can i put a hid 880 bulb kit into a 896 bulb spot. thr fog lights on my truck are 896 but only see 880 on hid kits

Ok so wondering something. My girl only has a driving permit not a full license. If she was pulled over by the cops while having to children and 2 drunk people in the car what would happen? I know technically it should be her and 1 other person that is license and over 18

Ok so ive been looking into this lately and basicly what im reading is you have to be a business owner but i am not. I did how ever start a newjob this year as a tractor trailer driver and am required by my employer to have a phone. I use my phone all day long when im sent to pick up differents accounts. I put anywhere from 6k-8k minutes on my phone A month 2k-3k being business related. Can i write off those minutes. Well that percentage. They are all used for calling in the main office with account probllems, our automatic dispatching phone system, my personal manage and felllow drivers under my contractor.(fellow drivers being getting directions or giving them helping with account problems and so on. Nothing in the personal chit chat category)

Also i work for fedex ground if this helps because i know there is atlease one other person on here that works there to that mightknow the answer as well.

Thanks very much for your time

basicly I need to know the maximum hours I can work in a single day. I work Mon-Fri,sometimes sat, and I was always told i can work 14hours a day, 12 hours driving time and max 70 hours a week. I am a local Driver, i travel at most 350 miles a day. I need to know what is true/false. I don wan to go over hours and im getting close to doing that i think

k just got HIDs in my silverado, they worked fine the first time turning on now when i turn the key to the on position they will turn on but the pass side take a minute to turn on, then when i start, the pas side will shut off. now if i use my switch to turn the lights on then start it its fine. should i put the relay o get a single power source and better connection to power, would it help.?

so I just started a new job driving a tractor trailer rig, and I can tell that the tractor they gave me hasnt been driven for awhile, and it is dirty, full of dust inside and just needs to be cleaned really really well. So the Question is I live on a residential Street which is off of a main street, can i bring the tractor to my drive way to wash and clean it out really good? I know that some of the streets around here say no trucks. but I dont know if it would be an exception. There is other streets around me that say the same thing and there is tractors parked in those driveways.

Thanks for any help you many give me.

Our daughter is really fussy between the hours of 11:30pm-5:30am. Now during the day she eats & sleeps just fine. every night between those hours she wakes up crying as if she is starving, we will feed her, during feedings she cry's the whole time we burp her. she may drink a tiny bit fall asleep for about 5 minutes wake up crying again, and then over and over this happens. it usually last about 4 hours. We always make sure we burp her good, and we really dont be leave it is colic because our other daughter had it bad, and didnt do what she is doing. also during this time, she has to be either held, in our bed, in a bouncy chair, or something something of the sort.

Thanks