Alex

I m nearly a guy and 20, and other than my immediate family I never been able to start or continue conversations with girls(even my brothers girlfriend). I started talking to this girl who just turned 18, I ve been talking to her and we ve been hanging out for nearly 5 months. I m pretty sure she likes me, she s given me hints a lot but I don t realize quick enough. We ve never kissed, made out, etc. But I think she s given hints a few times that she wants too but I just never caught on. How would I take the next step to something like that? What if the hints that I think she s giving me aren t anything? I m not a confident person, I just don t want to embarrass myself if she never had intentions of anything. Plus I honestly don t know how to bring things any farther.

I am looking for some help or some ideas on what this engine could be, a guy I work with bought it and the guy advertised it as a Rolls Royce Engine but it was not. The only markings and numbers all over the engine is an Octagon with the Letters AR inside and the R is attached to the A. Its aprox. 8ft Long, 4-5ft tall, a straight six with twin cams 4 valves per cylinder, 2 spark plugs per cylinder with a manual timing advance. Its cast iron heads, an Aluminum Block and is thought to be from the Late 1920's to early 1940's. He bought it without a carb so he assumes it may of not been ran by gasoline but maybe hydrogen. He thought it may of been used in a blimp and thats why it was built with twin spark plugs for reliability and aluminum for weight. It was bought near Toronto and he does not know what it came from and cannot find any information on the manufacturer from the symbol.

Looking at buying a set of tube doors for my Jeep Cherokee but I also use it as a Daily Driver and im wondering if I can drive on the Road with them in Ontario? they are still doors but not the original ones. Cant find much else other then it needing to have doors if it was manufactured with doors from the factory.

i am restoring one of my Pickup trucks and the frame rails are rotted and i cannot find another set/donor vehicle with ones any better shape. i have been thinking of making a set. Would i need any Special inspection such as a Structural inspection for Branded vehicles? would the vehicle be considered a kit car?

I bought a 2002 Dodge Ram 1500 with a 5.9L V8 about a Month ago and it needed some front end work, fix some exhaust leaks, a major tune up, etc. but every light except for the license plate lights and the high mount brake light were working so I changed those bulbs and one license plate light didnt work, switched the lights over and the same thing, its not a defective bulb. Then I drove it to work and back(about 5km) to fix some of the front end work and got back to fix the one license plate light and all of a sudden I have no tail lights, or license plate lights. Brake lights work, signals, high mount brake light, parking lights, low and high beams, the interior lights, etc. Anyone know what the problem could be I checked the fuses under the hood and every one for the tail lights are good and arent burnt, the license plate lights still look good and they are brand new.

Whats the best way to wash work boots, ones covered in cow manure? was working and had to go work around it and ended up falling in, only just above my boots so they are soaked in it. smell isn't a concern, just everything else.

is it legal to ride in the back of a truck in Ontario if i have seats and seat belts in the box that are bolted in?

Who manufactures the parts for Honda Small Engines like the GX200, GX160, etc. Also what are Manufactures for Honda Clone Engines(are they the same as Honda but the stuff not good enough for Honda Engines)?

I live in Ontario and I want to run doorless on my Jeep but it wasn't manufactured with removable doors so legally im not allowed(so I am told), would tube doors or Half doors be legal to run so long as I still had Mirrors?

Is It Legal to Drive without Doors or a Half-door(Door cut in half, modified but still has the lower section of the door) In Ontario?

I am planning on modifying my 89 Jeep MJ up a bit and would like to run no doors off road and wondering if I would need to carry doors in the box just to drive on the road.

i am looking to do some performance mods to my engine on my 16hp Briggs and Stratton V-Twin Vanguard Vertical Shaft Engine, i cant really find parts for them and if i do they are showing pictures on a Horizontal shaft engine. Where can i find performance parts for my engine and do the horizontal shaft parts fit on the Vertical shaft engines?

My Brother got in an accident in a parking lot, he drove his truck into the store wall(Cracked drywall on the inside and the outside stone but did no damage to his own vehicle). Would he be responsible for the repairs? I am assuming Yes but I am not really 100% sure.

I have a 33cc Scooter I had given to me and it doesn't run, I changed the carb(cheaper then a kit), and was pulling it over and it wouldn't run. I checked for spark and there is spark and I put some fuel down the cylinder then tried to get it running and again it wouldn't spark, I took the plug out set the gap to .020(I wasn't able to find any proper gap anywhere online for that engine) then once again tried pulling it over and again it didn't run, I put my finger over the spark plug hole after taking the plug off again and pulled it over to check for compression(don't have a proper tester) and it didn't seem like a lot of compression but enough to run compared to other weed-eaters and scooter engines.

What could be the problem why it doesn't run? is the Spark out of timing(It isn't backfiring)? Low Compression?

is this one sentence or two like I have it written for the example? "now here's a tip. Take a step back, and literally..."

I was playing around in the Sound section and in the playback tab i opened my headphones section(i dont know what else you call it) and in the general area near the bottom there is something that says "Device usage:" and a drop down bar that says "Use this device(enabled)" and "Don't use this device(disabled)" and i clicked disable to try and get it to work for my speakers and now i dont have the option to enable my headphones again. How would i re-enable my headphones again?

I made a mistake in my last question and said button instead of detector rail. How do I make a Detector Rail permanently stay on?

How do I make a button permanently stay on after i click it once?

I would like someone to tell me the size of exhaust piping is on a 2000 Toyota Echo, i am helping a friend do the resonator delete on his car and would like to know for proper price estimate.

Thanks!

Im wondering how can I Generate a Number Between 1 and 4 13 times and have it only add upto 26 in vb 2010?

I tried:

"Do Until var1+var2+var3+var4+var5+var6+var7+var8+var9+var10+var11+var12+var13 = 26

var1 = CStr(((4 + 1) - 1) * Rnd() + 1)

var2 = CStr(((4 + 1) - 1) * Rnd() + 1)

var3 = CStr(((4 + 1) - 1) * Rnd() + 1)

var4 = CStr(((4 + 1) - 1) * Rnd() + 1)

var5 = CStr(((4 + 1) - 1) * Rnd() + 1)

var6 = CStr(((4 + 1) - 1) * Rnd() + 1)

var7 = CStr(((4 + 1) - 1) * Rnd() + 1)

var8 = CStr(((4 + 1) - 1) * Rnd() + 1)

var9 = CStr(((4 + 1) - 1) * Rnd() + 1)

var10 = CStr(((4 + 1) - 1) * Rnd() + 1)

var11 = CStr(((4 + 1) - 1) * Rnd() + 1)

var12 = CStr(((4 + 1) - 1) * Rnd() + 1)

var13 = CStr(((4 + 1) - 1) * Rnd() + 1)

Loop"

If anyone could help, I tried it out and got 27 once and the next time i got 28.

Ive got some lights off a 1994 F-150 (the lights on the back of the cab at the top) and I was wondering if I would be able to make the signal lights flash, I want to use it for a bicycle trailer since most people won't be able to see me(because I need two other people to help pedal because im hauling scrap metal) and I thought in case the person at the back can't do the hand signal in time drivers passing by will atleast be able to see the light. So if anyone would know that would be great.