rate my system. answer my questions please. best answer?

quantity - 1

Legacy 3D33M

# old Down Detachable Panel
# 3 Inch TFT Wide Display
# 16:9 or 4:3 Wide Display
# NTSC PAL Compatible
# Picture Brightness/Contrast/Chroma/Hue
# Preset EQ Mode
# USB Function
# Subwoofer Output
# AUX Input Function
# 4 Channel RCA Output
# 30 Preset Stations
# Support DVD/VCD/CD/MP3/WMA/JPG
# Repeat/Program/Random
# AM/FM Stereo Radio System
# Auto Memory Store/ Preset Scan
# MAX Output: 80 Watts x 4 Channels
# Card Size Full Function Remote Control

quantity - 2

PIONEER TS-W3001D4 (TSW3001D4) 12" PREMIER CHAMPION Series PRO 3000W SUBWOOFER

* 12" Champion Series Pro
* Woofer Cone Material : Interlaced Carbon Fiber/Glass Fiber Reinforced
* Surround : Wide-Roll, 3-Layer Fiber Woven Aramid Radial with Honeycomb Cloth
* Voice Coil : Dual 4-Layer, Long Voice Coil
* Voice Coil Wire : Copper
* Voice Coil Bobbin : Phenol Resin Coated Glass Cloth
* Projected Pole Yoke with Vented Pole
* Magnet : Double Stacked 110oz
* Aluminum Die-Cast Rigid Chassis
* Gasket 1-Piece Rubber
* Integrated Single-Sided Silver Compression Terminals
* Max Power : 3000 W
* Nominal Power Handling : 1000 W
* Frequency Response : 18 - 700 Hz
* Sensitivity : 89 dB
* 2 or 8 ohm Capability
* Recommended Enclosure Size : 0.50 ~ 1.0 Cubic Ft
* Mounting Depth : 7.5"

quantity - 1

HIFONICS BXi2008D MONO Class-D 2000W BRUTUS Series 25TH Anniversary AMPLIFIER

* 1-Channel Mono-Block Operation
* 650 Watts RMS x 1 @ 4-Ohms
* 1300 Watts RMS x 1 @ 2-Ohms
* 2000 Watts RMS x 1 @ 1-Ohms
* SUPER D-Class Amplifier Topography
* Ultra-Fi MOSFET Outputs
* Illuminated HIFONICS Logo
* PWM MOSFET EXVP (Exponential Vari-Power Supply)
* SPC Twin Turbo-Torroids with Simpatico Coil Design
* Fully Adjustable Accu Cross Crossover
o 24dB Subsonic Filter (Adjust 15Hz~35Hz)
* Phase Shift Adjustments (0 to 180 Degrees)
* 24dB Low-Pass Crossover (Adjust 35Hz~250Hz)
* Bass Boost : Variable Equalization (+10dB @ 45Hz)
* Remote Bass Control Included
* Balanced Line Inputs with optional Hifonics MM-BLD-1
* Gold RCA Line Outputs
o Permits Amplifier Daisy Chaining
o 0.2V to 9V Signal Level
* 4-Gauge Power Connectors


# SPECIFICATIONS

* Amplifier Class : Class-D
* Number of Channels : 1-Channel
* Maximum Power : 2000 Watts
* RMS Power Output @ 4 Ohms : 650 Watts x 1-Channel
* RMS Power Output @ 2 Ohms : 1300 Watts x 1-Channel
* Bridged Power : N/A
* THD : 0.08%
* Signal-to-Noise Ratio (dB) : 95dB
* Frequency Response (Hz) : N/A
* Built-in Crossover : Yes
* High-Pass Crossover Frequency : N/A
* Low-Pass Crossover Frequency : 35Hz~250Hz
* Bass Boost : 0dB~10dB
* Bass Remote : Yes
* Fan Cooled : N/A
* Fuse Rating : 200A Dimensions (Width x Height x Length) Inches : 9.45" x 2.52" x 14.97
* Approximate Weight : 15.6 LBS
* Warranty Information : 1 Year Warranty

quantity - 1

HBX 12VEGA 12" Dual Ported MDF Subwoofer Box

* High Quality 3/4" MDF Construction
* Gold Binding Post Terminals
* Color: Black
* Port Size : 2"x 12 1/2"
* Dimensions (WxHxD): 36" x 14" x 16"
* Weight: 48 lbs

quantity - 1

EARTHQUAKE AK-5000 (AK5000) 4-Gauge 5000W Complete Amplifier Installation KIT

* Includes:
o Red Power Wire : 17 ft : 4-Gauge
o Black Ground Wire : 3 ft : 4-Gauge
o Speaker Wire : 20 ft : 16-Gauge
o Blue Remote Turn On Wire : 16 ft : 16-Gauge
o Silver Twisted-Pair RCA Interconnect : 6 ft : Straight
o Black Split Loom : 6 ft : OD 8mm
o Gold Plated ANL Fuse Holder : ANL Fuse : 150 A
o 4 x 4 Gauge Gold "O" Ring Terminal : 2 Red / 2 Black
o 2 x 4 Gauge Gold "U" Ring Terminal : 1 Red / 1 Black
o 4 x 14-16 Gold gauge "U" Terminal for speaker terminals on amp : 2 red / 2 black
o 1 x 16-22 Gauge butt connector for remote turn-on wire : 1 red
o 1 x self tapping screw : 1 tinned
o 10 x black cable ties : 120mm long
o 1 x grommets in black

quantity - 2

Hitron SPW18-100 18 Gauge 100FT Speaker Wire SPW18100

18 Gauge 100FT Speaker Wire Spool



Question 1 - Will this sound good

Question 2 - Is this a good amp choice for the Subs?

Question 3 - Will 200 ft. of Speaker Wire Be enough?

Question 4 - Will the Box work Well with the Subs?

Question 5 - What else do I need to install my amp and subs?

Question 6 - Will My Tweeters be hooked up to my amp or head unit?

Question 7 - Can i wire 2 4ohm sub woofers to a 1ohm load?

JMann2009-01-16T17:03:49Z

Favorite Answer

1 - It should sound okay.

2 - Wired to 1 ohm, that amp will be more than sufficient. It's good quality and in all of my testing it can attain it's rated wattage without clipping.

3 - You probably don;t need 200 ft. of speaker wire. 100 will probably be enough. If you use a harness adapter for the head unit, you may not need more than a few feet.

4 - The box should be good. Those subs work pretty well in a smaller, high tuned enclosure.

5 - It looks like you have the bulk of the necessities for the amp install. You'll probably need a few ods and ends, screws and such.

6 - From the looks of it, you'll have to hook the mids and highs to the head unit. You would need a seperate, 4 channel amp to power them any other way.

7 - Yes, you can wire 2 dual 4 ohm subs to a one ohm load. Wire the coils and the subs together in parallel. Use option 1 from this link. http://www.the12volt.com/caraudio/woofer_configurations.asp?Q=2&I=42

All in all. The only thing that I would change in the set up would be the head unit. The legacy units aren't very good quality. They have a tendency of crapping out after a few months. In my opinion, you would be much happier with a different unit. Look for a Clarion, Alpine, or Eclipse that fits your price range.

?2016-05-29T02:48:49Z

nO i DONT THINK SO,but I think this system is open to the cheats who for some strange reason just want to be top dog all the time.they can open up other accounts and /orget their friends to ask questions for easy answers to boost their ratings,they dont really contribute anything to Yahoo Answers do they,I have stopped giving any marks to such people now,wasters