Pool Filter/Pump starts for a second, then shuts off?

Question

I own an above-ground pool, and have a problem. Last night the hose that pumps water into the pool came loose, causing me to lose a bunch of water, and caused it to lower below the skimmer/water intake. Well, as you can guess, this caused the pump to run dry without any water.

So here's what I've figured out so far.  The pump is plugged into a GFCI outlet, which had been "tripped".  I pressed the reset button, and attempted to turn the pump back on.  It will start for 2 to 3 seconds, before the GFCI outlet trips again and shuts it off.

So what do you think the problem is, and how could I fix it?  I wouldn't think that the motor was fried, or it wouldn't even start for those couple of seconds would it?  And it shouldn't be a problem with the outlet, because I just replaced it a few months ago when rain got in it, and fried it. (The outlet now has a water-proof cover over it to preven that).

So I'm stumped.  Any help will be amazing.

Thanks,

Shane H.

Anonymous · Accepted Answer

if it ran dry,perhaps the impeller melted and its keeping motor from starting...heres a link with common pump problems: http://www.swimming-pool-information.com/pool-pump-problems.html

TJPatten · Answer

maybe some water sprayed into your pump motor and is causing the "trip". Let it sit and try it a day or two later.

? · Answer

This occurred to me as quickly as. might desire to be you have a scourge. attempt restarting your computer and if that doesn't artwork then attempt to open "My documents" and use that as a browser and get carry of Mozilla Firefox its safer besides basically attempt it. that's what I did, in case you could not get carry of Firefox on your computer, use a USB and get carry of it at a pals abode or some thing.

Trending News

Pool Filter/Pump starts for a second, then shuts off?

3 Answers