Yahoo Answers is shutting down on May 4th, 2021 (Eastern Time) and beginning April 20th, 2021 (Eastern Time) the Yahoo Answers website will be in read-only mode. There will be no changes to other Yahoo properties or services, or your Yahoo account. You can find more information about the Yahoo Answers shutdown and how to download your data on this help page.
Trending News
1992 toyota pickup 2.4 liter 5 speed transmission?
one day shift paturn is normal, the next day the transmission will pop out of 1st and 2nd, will not go into 3rdor 4th, but 5th and revers are just fine. what is the common link to the problem. it has a hydraulic clutch that is full.
5 Answers
- Anonymous1 decade agoFavorite Answer
Please do not replace the transmission yet! When the trans is acting up, pull upward on the shifter while shifting and continue to hold it up when it is in gear. If it works fine this way, you need a bushing for the shift lever.
It's fairly easy to remove, Just take off the shift knob, outer boot, console cover, inner boot (6 or so screws). You will see an aluminum housing with a steel collar inside it. (The shifter comes through the collars oblong hole) With your thumbs to the left and right push the collar down into the trans and twist counter-clockwise. If you do this right, the shifter, collar, and a spring will come right out. Look in the hole and you will see your worn shift bushing. replace it and your problems will be gone!
Source(s): Toyota Master Diagnostic Tech (MDT) 13 years - 1 decade ago
I have a 1991 Toyota pickup, almost the same thing happened to me. I had to get a whole new transmission for it.
- john mLv 61 decade ago
it might be a problem concerning your bearings....or the syncros are getting bad...
- How do you think about the answers? You can sign in to vote the answer.
- Anonymous5 years ago
dont think so,cruisers are 4wd
