Code for advent remote for Zenith tv?

Zenith codes, 1000 1001 1004 1051 1083 1151 1152 1154 1217.

1. Manually turn on the component you want the remote to control (TV, VCR, DVD, satellite receiver or cable box).

2. Press and hold the component key you wish to program. The LED indicator light turns on and remains on. If you release the component key any time during the Direct Code Entry procedure, the LED indicator light blinks four times, and the process is exited. The last programmed code under the component key is retained.

3. While holding down the component key, consult the Code Lists for the four-digit code that corresponds to your component’s brand and use the number keys (0-9) to enter it. After you press the first number, the LED indicator light turns off.

4. After the fourth number is entered, the LED indicator light turns on. At this time, release the component key. If the LED indicator light turns off, you have entered a valid code and have followed the correct procedure for Direct Code Entry.

If you enter a code number that is not in the Code Lists or you do not follow all of the steps for Direct Code Entry, the LED

indicator light blinks four times when the component key is released. This indicates a programming error has occurred. In this case, repeat the Direct Code Entry process from step 2 and try the next code listed.

TIP: Throughout the programming of each key, be sure to keep the remote pointed at the IR sensor of the component you are currently programming the remote to control.

5. To confirm that the component key is programmed with the correct code for maximum functionality, test the component.

Attempt to control a variety of the component’s functions with the remote. If some features of your components do not work, try programming the remote with a different code in the list until you find the code that allows the remote to control the majority of your component’s functions. Different codes can provide different levels of functionality.