Ball Joint adjustment 1985 Dodge 3/4 ton PU.?

There is an order to tighten sleeve and upper and lower joints. Don't have the manual w/specs right now, sorry. I believe you assemble knuckle into housing, tighten the lower joint to about 35 foot lbs, then tighten the sleeve to about 30 foot lbs, then tighten lower to about 90, then torque the upper to about 100 ft lbs. I advise getting correct specs.

Correct you cannot adust this without an expensive computerized alightment machine. Do as the other gentleman suggested, get a front end alignment at a local alignment shop, in my area a front end alignment is just $49.

Good Luck!

The adjustable upper is used to align the front end. If you do not have the tools to measure the caster and camber take it to a front end shop after you get it installed. Don't wait a week and wear out your front tires.

you have to get a shop to do this one,the only thing you can do with it to get it to a shop is set it so that the wheels are setting strait up and down the rest a shop will do when they align it,there's no measurements that we could give you that would help you in getting it back strait again,good luck.