Yahoo Answers is shutting down on May 4th, 2021 (Eastern Time) and beginning April 20th, 2021 (Eastern Time) the Yahoo Answers website will be in read-only mode. There will be no changes to other Yahoo properties or services, or your Yahoo account. You can find more information about the Yahoo Answers shutdown and how to download your data on this help page.
Trending News
Thermal paste question?
I am using some MX-4 thermal paste with the stock cooler on an i7 930. I think I applied it correctly but I am still idling at 60*. I know they say it doesn't have a burn-in time but even if it did should it be doing this from the start? Also, I would appreciate input on the best method to use as spreading it with a card was a major PitA. I know they say to only use a drop the size of a grain of white rice but that didn't spread all the way across the chip.
5 Answers
- 1 decade agoFavorite Answer
The key to applying paste is to use as little as possible to cover the entire surface of the processor. Don't apply any to the heat sink. I usually do it with a finger but it's hard to get off one's finger, so a scrap of a plastic bag over the finger works well. When you attach the heat sink just push it down and twist just a little for a good bond.
If you need to redo your current paste, I find acetone does a good job of removing the old stuff.
The i7 930 runs a little hot. I've heard about idle temps of 35-50.
Source(s): I'm an engineer and have done this hundreds of times with processors and with RF transmitter tubes in commercial radio applications. - brisrayLv 71 decade ago
You have to apply the paste thinly and evenly. The paste itself doesn't help much with cooling, that's what the cooler? is for. What the paste does is provide an interface to heat dissipate evenly from the chip without hotspots.
If you spread it too thick it actually decreases the maximum possible heat dissipation from the chip.
There's a nice "how to" at http://www.techpowerup.com/printarticle.php?id=134
- 1 decade ago
Apply a thin layer all over the processor .see that u spread the thermal paste evenly ....and see that the heat sink she fitted in the groove properly.
- Anonymous4 years ago
comparable element, and likely the Artic Silver 5 has been shown that it makes a difference over different manufacturers. I cant undergo in innovations the perfect source i examine that for the duration of, yet as quickly as I do, i will assist you recognize.
- How do you think about the answers? You can sign in to vote the answer.
- 1 decade ago
i prefer one should'nt reapply the paste by oneself unless u are a proffesional.
Take help of a proffesional
