RAM and Mobo Compatibility?

Yes they are compatible. Your DDR3 1600 Ram (Looking Good Bye The Way :) Yellow!) will work with that mobo. The mobo itself will detect your RAM hardware and adjust itself accordingly. Most likely the ram will run at next to max speed. Your BIOS will probably make your Ram run at an optimal setting. It'll be fine!

The RAM spec say they were designed with overclockers in mind, meaning that the modules will handle the stresses of being overclocked my better than other units available.

As far as compatibility, they are on the low-end of the MB's supported memory, but they are compatible.

the two might desire to artwork, the motherboard reads the SPID off of the memory, so memory is many circumstances plug-n-play (different than you overclock it). I continuously purchase the extra advantageous extremely-priced memory (although call form) and CL time does now no longer translate into extremely worldwide percieved basic overall performance. it is stable for benchmark bragging rights, it is approximately it IMHO. ?LGA 775 for Intel® middle™ 2 extreme / middle™ 2 Quad / middle™ 2 Duo / Pentium® twin middle / Celeron® twin middle / Celeron®, helping Penryn Quad middle Yorkfield and twin middle Wolfdale processors ?Intel® G41 + ICH7 Chipsets ?helps FSB1333/1066/800/533 MHz CPUs ?helps twin Channel DDR2 1066/800/667/533, 2 x DIMM slots, Max. skill as much as 8GB ?Intel® photos Media Accelerator X4500, Pixel Shader 4.0, DirectX 10, Max. shared memory 1759MB ?a million x PCI exhibit x16 slot ?PCIE x1 Gigabit LAN 10/a hundred/1000 Mb/s ?4 x SATAII 3.0 Gb/s connectors ?helps ASRock instantaneous Boot, instantaneous Flash ?helps clever BIOS, ASRock OC Tuner, clever capacity Saver ?EuP waiting ?5.a million CH abode abode windows® Vista™ stunning cost factor HD Audio (Realtek ALC662 Audio Codec) ?abode abode windows® Vista™ stunning cost 2008 type waiting ?I/O Panel: a million x Serial Port: COM1, a million x VGA Port, 4 x waiting-to-Use USB 2.0 Ports, a million x RJ-40 5 LAN Port with LED so a concepts as 800mhz vs 1066mhz? i does now no longer furnish it a 2d theory. The memory is DDR2 and quite can grant the equivenent of 1600mhz to the FSB via reality it handles 2 bits consistent with clock (why it is stated as DDR... Double tips cost).

Both DDR3, so yeah.