Yahoo Answers is shutting down on May 4th, 2021 (Eastern Time) and beginning April 20th, 2021 (Eastern Time) the Yahoo Answers website will be in read-only mode. There will be no changes to other Yahoo properties or services, or your Yahoo account. You can find more information about the Yahoo Answers shutdown and how to download your data on this help page.
Trending News
Regarding vacuum tubes, when replacing one, do the terminals need to be oriented a particular way?
To date, I have just placed a replacement tube into the socket in the same orientation as the old one but how does one determine the orientation otherwise? Thanks!
3 Answers
- Robert JLv 74 years agoFavorite Answer
Yes, they need to be in the correct orientation - but the bases are not symmetrical, you cannot really get it wrong.
Smaller valves (tubes) in eg. B7G or B9A bases have a gap in the pins.
https://www.cricklewoodelectronics.com/images/D/B9...
Larger ones like Octal have a key on the centre spigot.
http://www.abeltronics.co.uk/images/pictures/vac4....
Some older styles have an irregular pin arrangement or some large and some small pins, so again they only fit in one orientation.
- Anonymous4 years ago
Hi so they are designed to only go in the socket one way. there is a lot of myths about vacuum tubes and a lot of rubbish. so if it was a used one chances are it might not be any better than the one it replaced. the issue is about how they are internally constructed as the cathode is doped with negative electrons these get stripped off as it us used.
as this fact seems to be ignored. the result is a vacuum tube or what we brits call valves,. is they no longer work.
- Daniel KLv 74 years ago
Robert is right. Vacuum tubes can only be inserted into the socket one way by design. You would have to use a really stupid amount of force to insert one the wrong way and you would probably break either the tube or the socket.
