adam

I had our parts guy set me up with oil, transmission fluid and primary fluid. When I got home I noticed he gave me 4 quarts of 20wt30 amsoil and its supposed to be good in all 3 . I however always use primary fluid. Transmission fluid and motor oil respectively. I read online that its fine. I know lots of shops use one oil in all 3 but Im old school and never have. Im home .Bike is on my lift and I dont feel like going  out just to get a quart of transmission oil if this stuff works. 

Believe it or not the rally has not been cancelled in the face of the coronavirus outbreak! 

I recently did the free windows ten and now the cursor goes to sleep when I leave it sit for a short period of time. Is that a Windows ten feature? Its annoying because I have to move the mouse to wake it up. is there a way to stop that from happening?

If I want to run with light on I have to start it with the lights on. The motor will also die if I switch the ignition to just run from running with the lights on. I can of course simply hit the starter button AFTER switching to OFF and then back to tun. I can hear the only cuircuit breaker on the bike reset as I do this. Already replaced the ignition switch. all the wiring looks OK. This bike is kick and electric start and wired like a chopper. It has a starter relay and one overload breaker. Havent looked yet at headlight wiring. Everything under the dash looks correct. Anyone have a thought? if you arent familiar with OLD bikes dont waste my time with your guess! I have already removed the neutral safety so she fires up in gear and replaced the ignition switch and the starter relay and the breaker.

My 84 sporty usually needs a front rocker box gasket every six months! The last time I used Yamabond with the same result. This time im going to try Permetex copper. Anyone else have this problem or a good idea?