Hung N

*... điều lành mang đến, điều dữ mang đi...

*... điều lành mang qua, điều dữ mang về, qua qua về về, đi đi lại lại, tới tới lui lui... người chịu một ít.

Hai câu cúng vái trên, không biết câu nào của bên nào?

Các bạn nghĩ sao, giúp mình với.

I had changed the timing belt, water pump, timing belt tensioner, hydraulic timing belt actuator and belt Idler on my 2000 Acura TL 3.2. I'm positive that after changing the parts, I assembled everything exactly where they belong, even the bolts. After that it was working fine, but after a couple days, there was a clicking noise at the crank pulley. And while accelerating unto a highway/freeway, the engine emits a strong vibration causing the car to also vibrate, which causes the clicking noise at the crank pulley to be louder, but even though it vibrates, it doesn't cause a change to the cars running ability or the engine RPM, but if I decelerate the vibration stops.

I used to think the noise was at the drive belt tensioner or the alternator and AC pulleys, so I took the drivebelt off and heard the noise at the crank pulley after 10-15seconds of starting the engine(car in park at idle) then drove around. and the problem still occured.

Do you guys know anything about this? this is giving me a headache right now, thanks in advance!

My truck problem is fixed BUT when i put everything back together i accidentally over tighten and broke the thing that looked like a bolt (with nut) for Belt Idler Pulley - Air Conditioning spins around it.

What is that parts called and where can i purchase it?

Please can anyone help? I appreciate it.

Thank you.

Hello guys, I have a 2003 Toyota Tundra,V6, 133,XXX miles.

When the engine is warm, it looks like it misfired. When the engine is idle, and the problem starts, I heard a chirping noise like the sound crickets make around the alternator. When the engine is off, I heard a small sound that sounds like a horn somewhere around the intake manifold. I changed the ignition coil, spark plug, and the airflower sensor but it didn't help.

I have tools to check for fuel system pressure but I have no idea how to connect to the system. My toolkit won't fit anywhere on the system.

Do you have any idea what's the problem?

Any idea how I can test the fuel system for this vehicle? What adapters are required? And where to connect them to?

Thank you all in advance!!

Does anyone know what happen to my 2002 tundra V6 ?

with these errors :

P0222, P0102, P0113, P0122, P0101, P2135.

I am thinking why got these error at the same time, maybe computer goes bad.

Can you guys help please, Thank you in advance.

Does anyone know what happen to my 2002 tundra V6 ?

with these errors :

P0222, P0102, P0113, P0122, P0101, P2135.

I am thinking why got these error at the same time, maybe computer goes bad.

Can you guys help please, Thank you in advance.

Just installed the system but three are not enough sensors for all windows and doors. i bought some more contact and motion sensors from a friend. I really don't know what to do with these sensors.

Does someone know how to set them up, instruct me step by step properly please ?

Thanks you in advance.

Ban nao biet cho hoi :

Tai sao oto thang dia TRUOC duoc lap o phia mat truoc, thang dia SAU duoc lap o mat sau.

Cam on.

Hello everyone, first off I would like to thank you all in advance.

I'm looking for a good TV to place in my room, so the size would have to be around 40" . Here are the specifications I'm looking for:

- 1080p

- 120+ hz

- Smart TV

- Wi-Fi built with access to World Wide Web

- exceptional Video quality and sound

- Optional brand

LED vs Plasma?

Thanks again in advance

http://vnexpress.net/gl/phap-luat/2012/02/nghi-pha...

Chuyến nầy anh chàng bố vợ đi xé lịch là cái chắc.

………………….._,,-~’’’¯¯¯’’~-,,

………………..,-‘’ ; ; ;_,,---,,_ ; ;’’-,…………………………….._,,,---,,_

……………….,’ ; ; ;,-‘ , , , , , ‘-, ; ;’-,,,,---~~’’’’’’~--,,,_…..,,-~’’ ; ; ; ;__;’-,

……………….| ; ; ;,’ , , , _,,-~’’ ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ¯’’~’-,,_ ,,-~’’ , , ‘, ;’,

……………….’, ; ; ‘-, ,-~’’ ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;’’-, , , , , ,’ ; |

…………………’, ; ;,’’ ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;’-, , ,-‘ ;,-‘

………………….,’-‘ ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;’’-‘ ;,,-‘

………………..,’ ; ; ; ; ; ; ; ; ; ; ; ;__ ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ‘-,’

………………,-‘ ; ; ; ; ; ; ; ; ; ;,-‘’¯: : ’’-, ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; _ ; ; ; ; ;’,

……………..,’ ; ; ; ; ; ; ; ; ; ; ;| : : : : : :| ; ; ; ; ; ; ; ; ; ; ; ; ,-‘’¯: ¯’’-, ; ; ;’,

…………….,’ ; ; ; ; ; ; ; ; ; ; ; ‘-,_: : _,-‘ ; ; ; ; ; ; ; ; ; ; ; ; | : : : : : :| ; ; ; |

……………,’ ; ; ; ; ; ; ; ; ; ; ; ; ; ; ¯¯ ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;’-,,_ : :,-‘ ; ; ; ;|

…………..,-‘ ; ; ; ; ; ; ; ; ; ; ; ; ; ; ,,-~’’ , , , , ,,,-~~-, , , , _ ; ; ;¯¯ ; ; ; ; ;|

..…………,-‘ ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;,’ , , , , , , ,( : : : : :) , , , ,’’-, ; ; ; ; ; ; ; ;|

……….,-‘ ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;’, , , , , , , , ,’~---~’’ , , , , , ,’ ; ; ; ; ; ; ; ;’,

…….,-‘’ ; _, ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ‘’~-,,,,--~~’’’¯’’’~-,,_ , ,_,-‘ ; ; ; ; ; ; ; ; ; ‘,

….,-‘’-~’’,-‘ ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; | ; ; | . ghét ,’; ,’’¯ ; ; ; ; ; ; ; ; ; ,_ ; ‘-,

……….,’ ; ;,-, ; ;, ; ; ;, ; ; ; ; ; ; ; ; ; ; ‘, ; ;’, .thù .,’ ;,’ ; ; ; ;, ; ; ;,’-, ; ;,’ ‘’~--‘’’

………,’-~’ ,-‘-~’’ ‘, ,-‘ ‘, ,,- ; ; ; ; ; ; ; ; ‘, ; ; ‘~-,,,-‘’ ; ,’ ; ; ; ; ‘, ;,-‘’ ; ‘, ,-‘,

……….,-‘’ ; ; ; ; ; ‘’ ; ; ;’’ ; ; ; ; ; ; ; ; ; ; ‘’-,,_ ; ; ; _,-‘ ; ; ; ; ; ;’-‘’ ; ; ; ‘’ ; ;’-,

……..,-‘ ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;¯¯’’¯ ; ; ; ; ; ; ; ; , ; ; ; ; ; ; ; ; ;’’-,

……,-‘ ; ; ; ; ; ; ; ,, ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; |, ; ; ; ; ; ; ; ; ; ; ‘-,

…..,’ ; ; ; ; ; ; ; ;,’ ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;|..’-,_ ; ; ; , ; ; ; ; ; ‘,

Sometimes when I accelerate, the check engine light blinks then doesn't. I pulled the code that is p0301 ( cylinder 1 misfire detected ). What does that mean, spark plug or something else ?

Can you guys help to tell me what exactly happen ?

Thank you in advance.

I have never done or seen how to take it off. I need to take it off from the car to change the cv-boot. I tried all day to remove it, but I couldn't. Anyway to help me remove it?

Help me please, thank you all in advance

It's 1994 camry v4, 2.2L.

I put the scanner and i got the DTC 22 code, ECT sensor circuit. Check Engine light came on sometimes when engine is cold no hot. Does this mean there is something wrong with the sensor? Also the car sometimes shakes and turns off by itself sometimes whenever engine cold or hot, what does this mean?

How come ECT sensor problem cause engine shaking and shut off sometimes ?

Thank you in advance.

I bought one, It's silver, but it's without the foglights. Now I wood like to put them in. Is there the vehicel foglights electrical system ready or i have to build it in, and what about the switch ? I am really worried about the switch.

Can you guys help please.

Thank you in advance.

It's a 1994 Camry V4, 2.2 L. After i changed the head gasket, my car idle became too slow. It seems like it doesn't have the cold engine starting idling anymore, i mean it seems like the air idle control valve doesn't works. Sometime the engine shuts off by itself whenever the engine is cold or hot. When the engine is cold, it's hard to start and the check engine light turns off a few minutes late after the engine starting on. Right after that, the check engine light turns on and off by itself. After driven for about 1 mile the check engine light goes off forever.

I checked everything but didn't see anything wrong.

Also i heard the '' shhhhhhhhhh '' sound when the engine on. I thought the vacuum leak problem, but i can't figure out where it is.

Do you guys have any knowledge about the problems above ? please help me.

Thank you in advance.

My 1994 Camry V4, 2.2L, a/c compressor works good. i don't want to spend money to change the whole things. Is there anyway to change only the bearing ? And what are the special tools to take the pulley and bearing off ? Can you guys help, please.

Thank you in advance.

Its a 1994 Camry, 4 cylinder, 2.2 L. Recently, coolant has been transferring to the container too much, When I park my car after driving, I hear bubbling noises in the container. Every time after driving, the coolant in the radiator is only about 95% full. Each time I tried to bleed the air out of the coolant system, it seems to take forever, I even turned the heater and fan to max. I have no patience to wait for this long.

I think there;s a problem with the head gasket. I checked the oil and it was fine, no water mixture. I even changed the radiator cap and it still didn't work. Every day after driving home from work, I pour a little water back in the radiator, and get ready for tomorrow.

Anyone who has an idea what the problem is, please help me. Thank you guys in advance !

One of my friend live in another country have this coin and he would like to know where he can sell it. Thanks all.

can you guys tell me why the radiator fans are always on ?

it is a 1998 camry v6 version.

thanks for help.