Juan

bought a product from local market, and found what appears to be ratt droping.

what should I do first

call lawyer

call supermarket

or call local health dept.

I know I have to call market place and health dept.and that is ASSUMING that it is ratt droppings.

what would happen if I surreder product to either health dept. or market place,

IF I get sick can I still seek legal action against market place even after I surrendered the evidence?

I tried one of those YouTube mug cake recipes in the microwave but made a slight change in the recipe, it rises (gets spongy) if cooked in a microwave but not so much if cooked in a toaster oven. Does any one knows why?

Recipe is about the same but no oil.

Both cars are 4 cyl. I know some car makers share the same pattern distance at the wheel hubs (rims) like 100mm X 4. Honda, toyota and others share the same specs on the rims.

I wonder if the same applies for the flywheel. I'm basing my suspicion on the fact that the size of the mounting part on the crankshaft is almost the same size on those engines.

Will a 390-395 nm LED lamps(9-10W total) cure minwax oil based woodstain and quick dry urethane clear coat on a light to mild application. obviously I would dry each one individually.

IF 9-10W is not enough please let me know IF that is low or to much W. any ideas of how fast it'll do the job?

before anyone says " It can not dry " please keep this in mind.

.

I've sun dried heavy coats of wood stain under direct sunlight in less than 1 hr. just placed the piece outside and bam 1 Hr later and it is dry.

I never really thought of this until today.

If we are outside doing some chores or just washing the car, what would be the strength of UV light in terms of Watts.

Thanks.

I'm in central FL BTW. If that helps.

does anybody knows the code # or ordinance # for building a small shed.

Im tired of looking at the orlando code of ordinances and Can't find details of sizes of a shed to be built with out a permit.

I need to know the displacement of a typical residential 3 ton hvac compressor.

tI know they are like 2- 3 Hp motors but that is it.

thanks

I know about the environmental consequences

just need to know why was it used in the first place.

what was it supposed to do to the refrigerant that needed chlorine vs without(R134A or something else). was it to increase head pressure, lower it, heat dissipation...??? what was it.

thanks

if not, is there a way around it. I have no intention on buying a blue ray player or smart tv.

unless its one of those $40 blue ray players which btw I don't think will do the trick.

thanks in advance

Well I am NOT a certified mechanic nor do I have a business.

with that being said.

I have a car from a guy(A) who purchased the car and after 10 days from purchase the car broke down. the car was not registered by guy (A).

I repaired the car but I was not paid. the car is still under the person's name who sold the car to guy (A).

Can I put a lien on the car? I don't mind waiting a few more weeks for the whole thing to work.

btw guy(A) who I bought the car from left the country. if that helps.

thanks in advance

Why is it that for a 88-91 CRX: 1.5

the exhaust pipe diameter is 1.5" for a DX which is rated for 92HP

and

1.75" exhaust pipe diameter for an HF which is 62 hp.

I need to replace the resonator pipe from cat to muffler connector(right before rear suspension bracket) and what I see is bigger diameter for an HF. I am a bit confused.

btw I don't need a 2.25" fart cans pipes. mine has a 1.5" with a flowmaster knock off and its is loud enough for me as it is.

I suspect that I "could" lose a bit of low end torque by using bigger size pipe but the difference is not that much (IMO). hopefully.

I suspect that the Dx and HF are the same shape(bends) except for pipes diameter . the Dx is 1.5" and HF is 1.75". am I correct here?

thanks

I need suspension bushings for my 90 civic. I need opinions from different users of the above mentioned brands. feel free to include your favorite.

please describe how you use the car. is it spirited driving, occasionally spirited, just a Daily Driver sooth driving....

I give a spirited driving occasionally, but 99% the time over a straight line street and minimum cornering.

I can not afford OEM from dealership, so save your time, and no I am NOT interested in POLYs.

only regular rubber.

thanks

I am about to prime my car and I sand it down with 320 grit. but I can't shake the feeling that is is a bit too high and the primer will not adhere to the surface.

Do I have to go down to a 180 or 220 grit sandpaper to m ake the primer stick well? I know it will but just wondering IF I can get away with 320.

Primer is F1 from Sherwin Williams (Acme) Urethane primer. FP410.

if that helps

thanks

I know I NEED a P2J-003.

I want the engine for its fuel efficiency. its not for racing or anything in that fashion.

is there another ECU that can control a 3 stage vtec + maps D15B engine out there?

thanks

Well I am confused by these whole JDM stuff. I need an engine and every place I look for a low miles engine claims that their engines have 25K-55K miles

really?

that's like 2 or 3 years of use. I know Japan has their low emissions rules set hight but really? 55,000 miles. and you need a new engine! huhhh!!

please answer if you really know, don't give me that whole advertising crap they say. a while back someone claimed that if you visited Japan and wanted an engine it was free IF you pulled it out the car yourself. A guy at a parts store told me that his son was stationed @ Okinawa or IDK, it was Japan, and the whole thing was a sham, not true!

considering how many kids are there with their JDM engines and what not,

did they made that many and does these engines are still sitting at the yard after all these years and still look like new?

how can that be? sounds more like a rip off. maybe these engines come from elsewhere but Japan.

does anyone really knows the truth about those JDM imported "low miles engines"

thanks

hello Yahoo Answers Community

my cousins 1993 F150 4X4 Dual fuel tanks refuses to start.

I installed a fuel pressure gauge test tool and the fuel pressure rises to about 32psi when priming and as soon as the fuel pump stops the pressure drops to 0. obviously the truck doesn't star.

the fuel pump is out already. i just don't want to spend 225 to find out its not the pump.

front tank is dead as well so we were using the rear tank.

What will cause the fuel to flow back to the tank as soon after the fuel pump primed?

any help will be appreciated.

thanks

Fuel pump primes and the pressure is lost as soon as the fp stops. Shouldnt it hold pressure to start?

Hi

I am just curious to know if anyone knows how much are the impact fees and / or assessment fees for a vacant lot on Orlando Fl

My cousin is looking for a vacant lot or an already set piece of land. and one thing He wants to know is the cost of breaking grounds when the impact fees/assessment fees need to be paid.

thanks.

Hi Y.A community.

I am considering buying a vacant lot but besides taxes and maybe a realtor commission I really don't know what else will be added to the bill.

A friend mentioned something about the city charging about $25,000 for having the water or electricity hooked up, or something like paving the road in front of the lot if there is none.

can someone help me at least know what to expect from the city assessment or whatever its called.

thanks.

I'm looking for properties in Central Florida if that helps.

I was looking at the web and came across these 2 companies selling pearl powder for automotive finish (paint). I am not after a show room quality job/product. its for my Daily Driver so, no no high end stuff please.

SIK custom paint.you know what (YKW)

Paint with pearl. YKW

IF you have used it, from 1 to 10(being the best)how good is it.

are you satisfied with the product AFTER you sprayed it. has the product faded or lost some luster/gloss...

Do you know from another company in the U.S that sells the same products at around the same price.

PS no I don't want to spend $200- $300 for 1 Oz from house of color.

thanks in advance.