wag19wag

I am going to be doing a piloting service, this is where you escort the "Wide Load" Trucks. I need to get a yellow rotating caution light bar for the top of my vehicle. I can not seem to find a store that sells them, either online or not. Does anyone know of a store that I can buy these at?

I have $25,000 in cash and would need to borrow an additional $100,000 to get the house I want so when the mortgage calculator asks how much you want to borrow and then asks what your down payment is going to, percentage wise, should I be putting in that I need to borrow $125,000 and will be putting a down payment of 20% down?

I always thought, and was told, that on any AR platform whether it be an AR-10, 15, etc that the charging handle does not come back when the rifle is fired. So when you pull the charging handle it engages and internal bolt system, however, in the newest issue of "Guns and Ammo" it has an article about AR-15 being super accurate and in the article the author talks about firing one of the new 450 Bushmasters and being hit in the lip with the charging handle when he fired the gun, and later talks about watching out for it when he fired an AR-15. So does the charging handle come back when ejecting each round?

If for example an income statement for a company says that all number are expressed in thousands than that would mean if it just had the number 1 for total assets then the total assets is 1,000. Is that correct? So if it said it had total assets fo 62,348 I would add 3 zeros to it to get the actual amount, right?

I am trying to figure out the total fixed assets so that I can figure the fixed asset turnover ratio. I am using the Income and Balance sheet for SHLD or Sears. Here is the link to both the balance sheet and the income statement.

Income Statement

http://finance.yahoo.com/q/is?s=SHLD&annual

Balance Sheet

http://finance.yahoo.com/q/bs?s=SHLD&annual

Now I understand a fixed asset to be property plant equipmet or some type of tangible asset. So if I take the sales from the income statement from the 1st colum I would divide that by the fixed assets. However on the balance sheet there is the Property/Plant/Equipment amount and then at the bottom of the sheet there is Net Tangible assets. So my is which one do I use for fixed assets?

I was wondering on the A3 versions of the AR-15 that come with the detachable carry handle, if the handle is attached to a picatinny rail or would I have to buy a picatinny rail to put on after I take the handle off?

When I try to play it it pops up with an error message saying my graphic card or driver does not support UBYTE4N vertex data. I have a brand new computer wih Vista do I need a better Graphics card or is there a way to either update teh drivers or change the settings of COD to make it run with lower graphics?

The DPMS AP4 is designed like any other AR15 type rifles so any after market AR-15 magazines will fit in it correct?

I will be getting a DPMS AP4 here in January and I want a good red dot scope or something similar like a Holagraphic sight. I do not want to spend to much money and both of these scopes look pretty good, but I was wondering which one is better for fast acquisition of targets. I just using it for target shooting and maybe some competition. The reviews on both seem good and I am leaning towards Scope #2. I am open to additional suggestions if anybody has them.

Scope #1

http://www.midwayusa.com/eproductpage.exe/showprod...

Scope #2

http://www.midwayusa.com/eproductpage.exe/showprod...

I need to replace the steps off of my deck, I can build the steps just fine the question I have is should I put a concrete slab down for the steps to sit on so they don't rot as bad from being in the ground? If a concrete slab is the best way to go do I need to put gravel under the concrete to create I type of patform and give the concrete something to grab to(I have seen this done before), also do I need rebar, I would guess the actually concrete slab would only be 3 or 4 inches thick or should it be thicker with rebar?

I saw this thing on Yahoo home page one time and if you typed this certain thing into the Run command on Windows start menu then it would open up a window that showed you every program that started when Windows started, what is that command?

My question is if a stationary uprigt bike offers a better workout than doing the same thing on a recumbent bike or vice versa? Or does that bike just offer different levels of comfort? I have included pictures of the 2 bikes I am considering, price is not important just which one offers the better work out. Picture #1 is the upright bike and Picture #2 is a recumbent bike.

#1 = http://www.sears.com/shc/s/p_10153_12605_006216000...

#2 = http://www.sears.com/shc/s/p_10153_12605_006215210...

I saw a sign in a Plumbing Retailer that said "Clogger is only sold to Licensed Plumbers" What is this Clogger they are talking about?

I have taken off the front metal piece and the top piece of wood, I took off the screws for the trigger guard and I thought that the trigger guard would just come out but it is stuck on the bottom end towards the front of the barrel. there is a small hole next to where the screw came out. I thought that is where the locking screw went, but maybe it is something else. Any help would be appreciated.

If I were to go see a personal trainer and I told them I wanted to build muscle and lose fat, what would they tell me to do? In my highschool gym class we did weight lifting on Mon Wed and Fri and we ran around the track on Tues and Thurs. Would this be a good way to go with resting on Sat and Sun? The exercises would not last more than an hour.

On this discription of the K98 I was gonna buy it says does not inclue cleaning rod, sight hood or locking screws. I know what a cleaning rod is what is a sight hood and locking screws?

I was thinking of buying an original K98 Nazi Mauser from WW2. Does anyone know if there are any companies that produce reproduction, new, barrels to replace teh old barrels if they are not fire ready? Also would be looking for other parts if anyone has any good links or companies.

I have been reading a lot about building mucsle and losing fat. On the one hand I have read to only work 1 muscle one day a week, ie abs/legs day1, shoulders/chest/triceps, day 2, biceps/traps/back day 3, Days being MON WED and FRI. This also includes eating right and eating more calories in a day than I expend inorder to build a lot of muscle. On the other hand I have read to work out MON WED and FRI, but do the same exercise each day so each day I would work legs/abs/biceps/triceps/shoulders/back, the exercise of which could take 1.5-2.5 hours. The first exercise plan has to take less than an hour each day. As I read if after 45min of working out the muscles have been fully stimulated and any longer working out will only decrease the work you have already done. I guess my real questions are is it better to work only a mucsle only once a week or more than once, should the work out be less than and hour or is more okay, and should I eat less or more calories than I expend.

So I'm an idiot, I almost have an Assoicates degree in Accounting and will do the Bachelors to make my family happy, but the only reaosn I pass the classes is because I have the books in front of me and can look up the answers I can't remeber anything. So is there a job where I can learn the job on the job and make good money, or am I just completely screwed from ever having a good job and shoud just give up now and keep the stupid maintenance job I haver now, it pays 11.83 and tops out at 19.40, but I only get .23 cents raises each year, and that if I get top scores on my review.

I am starting a body building program and I am going to be drink about 3-4 protein shakes which would include drink about 40 ounces of milk a day. 8 ounces per shake for 3 and 1 16 ounce at bedtime. Is this amount of milk everyday going to cause problems, ie kidney stones is my biggest concern, or will it be okay since I will be doing high intensity owrkout and will be needing all the protein and calcium?