kaeksen

http://seekpart24.com/jakoparts/alternator-j511800...

This is the regular i have from before, but i need a BIGGER one.

I need to find one that fits my car, thats atleast 100A

Or even better, the biggest you find..

Perfect match right? :)

http://img834.imageshack.us/img834/6341/hytaler003...

What else you see i can improve on. Im planning to take it from my car today and do improvements on it. Please come with insightfull tips on how this "raw power" enclosure can be as efficient as possible, thanks. Im not so good with this, havent enough experience, so i need yours!!!

I will get better sound quality, but less punch. Atleast now all my amps and speakers play in harmony.

Before it was too much bass i must admit it. But after the "raw power" project was done, i didnt need as much bass, cus the project system was powerfull too.

Anyone else tested the T1500 in 8 ohm, what you think?

I dont know what you need to know to determin it, but iwill give it a try.

I have 2 Vifa TC26TG05-06, 2 CA21RE 8" 8 ohm, woofers. I have 2 CA21RE 8" 8 ohm working as midrange. Enclosure is arround 24liters big with wooden splitter for Stereo.

This im running on a carpower 4/600 @ 4 ohm (with the filter i have in it its 4 ohm load out)

Sub is a Pioneer TS-W3002D4 running from a Rockford Fosgate T1500-1BDCP on 2 ohm load.

Headunit is Pioneer Avic-F930BT, where i run a juego Macron 25mm dome. (those will not be using the active filter, since they are on the HU.

Tell me what else you need to know to help me?

I noticed it when i had to drive arround without the sub on.

Then when i had it on while only using the regular speakers, the loudness sounded much better for the small speakers than for the huge subwoofer.

Why do the sound get higher when you reach that treshold?

Please explain in fine details, thanks.

Or need i buy a bigger one for use in car?

I dont use the 5:1 anymore on it. I just use stereo. That means i have to regular and one center speaker left. I dont wanna use the center.

I just wanna hook 2 & 2 in parallel....

Cutting the woods: Done.

Sandpaper it: Done.

Mount speakers on it: Done.

Mount crossovers on it: Done.

Drilling screwholes, and lots of them arround enclosure: Not done yet.

Life is wonderfull, and it is also becomming awesome the enclosure, yippi cayee.

Its colored very bright, red,yellow,red,black,red,blue,red,green,red.

I think, its very small.

I will take pictures of it.

Ok lets say an element thats 250W max RMS in a Ported Box uses a 250W RMS amp..

Then lets take sealed, with powerfull amp, how much more powerfull do the powerfull amp need to be over 250W RMS to power it in sealed? Since sealed needs more power, i thought it would be interesting to ask.

The caps, the other stuff in a bandpass is it different components in AC than DC?

Hehe, gotta know, not that it matters much.

Im giving it a try for the fun of it.

I will use 4 CA21RE (8 ohm speakers)

http://www.google.no/url?sa=t&rct=j&q=ca21re%20h%2...

2 Tweeters TC26TG05-06 (6 ohm)

http://www.parts-express.com/pe/showdetl.cfm?Partn...

Bandpassfilter i have for it, if thats the english term for it.

Maybe rca from hu to channel is set in sub channel? Instead of left & right used?

So i was reading on low pass filters, and high pass filters.

Im a music freak, that wants SQ over SPL, even if im running a subwoofer thats SPL (didnt see that when i bought it)

Ok here is what i have done BEFORE i read about LP and HP, and FULL, realy didnt understand much.

HU amp runs: 2 Tweeters in dash : HPF set to 125Hz (50Hz-125Hz)

4ch amp runs:Ch 1/2, 2 midrange w/tweeters: HP 15Hz (15Hz-150Hz).

4ch amp runs:Ch 3/4, 2 Fulltone Speakers: (Have the amp set to fulltone) <Dont remember settings.

Monoblock runs: 1 Sub in the trunk, sealed enclosure: LP set to 35Hz (35Hz-250Hz)

So after i have read about LP and HP, i realized i had set my system wrong for SQ.

Here is what i think i have done wrong and right:

HU mounted tweeters are correct set, there i have set to 125Hz, meaning i dont let the low frequencies comming to the tweeters.

The 4ch i dont think i have right, instead of only cutting 15Hz i should put settings on cutting frequency on 150Hz on the ch 1/2, and set ch 3/4 to full is right (but here im not excactly sure what to do??)

The Monoblock i should set to 350Hz, and allow all those frequencies to play.

Am i right, if i want its full potensial?

Help me on the fulltone settings on what filters to set there?

Thx :)

Ok so i installed the IE9, but nothing changed, still the "your allmost done" screen..

I cant find anywhere in my manual where to turn of my dvdplayer. Can i get a switch?

What switch do i need, where do i put it behind on the HU harness?

I want that switch to be in my dash somewhere, so it needs to be good lookin ^^

Its allways on when i am driving, or keys ar in acc.

There is no off in my dvdplayer.

The dvdplayer is off when keys arent in the ignition.

Please give tips, links and whatnot.

I know many does this, and its convenient doing it. But will it be ok?

Please dont just say no, prove it please, and not by saying amps will shiver to peaces, and parts will fly etc.