What to do about a Replacement Freezer Seal?

Question

Hello There,
We have an Old (1965 model) GE upright freezer. And yes it usually still works great! The problem is it frosts and freezes up (where we have to unplug and defrost it) every couple of months. The reason we see for this is that the door seal is not closing tightly (it's old and seems to be compressed/broken down). We have called around to several repair shops and they said that that particularly gasket was stopped being produced 2 years ago. I've also done internet searches to no avail. SO now what do we do?
We don't want to have to get a whole new freezer, but is there something else we can use to "build up" rubber seal or something to fix it? Any ideas?
Thanks!

ms manners · Accepted Answer

Maybe you could use a gasket from a newer model?
Im no expert, but it seems to me that refrigerator gaskets would not be that specialized - the material should be the same, just the height and length would vary.  So a similar sized model might have a gasket you could use.

No experience in this area - just my thoughts. :o)

Hex92 · Answer

That 1965 model freezer is probably costing a fortune to run. Its time to replace it. A new energy star rated freezer would pay for itself in less than 2 years.

? · Answer

The seal is cheap but it is best to purchase direct from the manufacturer's website for the exact model of fridge to avoid any size and fitting issues. Replacing the seal is simply placing it over the original one's place and the adhesive sticks on in about 5 minutes.

Phil And Buster · Answer

Oh, I hate to be the bearer of bad news.  It's time for a funeral.

Check with your utility company to see if they will pay you to unplug it. Here in my part of CA they do (or did) but in must be in working condition.  Don't wait until it dies.

Then go to craigslist and shop for a *used* freezer.

Trending News

What to do about a Replacement Freezer Seal?

4 Answers