Connect a non wireless desktop to wireless network via laptop?

You will need either a crossover cable or run it through a switch first to correct the input/output wires between the 2 computers. Then you will need to configure Internet connection sharing on your laptop.

If your laptop can connect to your home network then the desktop will work too. Buy a wifi adapter for the desktop. It can be an internal PCI card or an external USB adapter.

My guess is that neither the laptop nor the desktop (with the new adapter) will be able to connect if you are really several walls and floors away from the router. In that case suggest you get an adapter with an external antenna and then also buy a 'high gain' antenna to use with that. These are better at connecting to weak signals.

while you're working abode windows Vista or abode windows 7, the respond is what became published via the different person. The greater moderen version of abode windows are smarter, yet basically before "bridging" the connections, make confident the host (the only using the instantaneous) is already waiting to get right of entry to the internet. in any different case abode windows can get puzzled and configure it improperly. while you're working abode windows XP, the technique is slightly much less handy. as quickly as you have long previous into the properties of the host (the internet linked computing gadget using instantaneous), and examined that ICS (internet Connection Sharing) is enabled, you will could configure the 2d computing gadget (the only connecting via go-over, we will call this the "customer") to apply the "host" by using fact the default gateway. So permit's the the "host" picked up the IP handle 192.168.a million.one hundred and one, which ability on the "customer" your "Default Gateway" must be 192.168.a million.one hundred and one. you will could set this statically, by using fact your "host" can't dynamically assign an handle the the customer as that is not a server, change or router...it quite is a working laptop or computing gadget. additionally take not of the Subnet mask of the "host", it is going to could be a similar on the "customer". As for the IP handle of the "customer" you are able to set it to be on digit after the "host" which, in our occasion, could be 192.168.a million.102. this could get you working. yet remember, that is obtainable for the host IP handle to alter whilst using instantaneous, by using fact as quickly as you disconnect, it frees up the handle for yet another gadget. So if issues without notice provide up working, verify your IP on the "host", it could have replaced.