Kenster102.5

I had been messaging her through POF, and there was a great conversation going. She gave me her number, and I texted her this week. She warned me that neediness is unattractive, but we sorted it out, and continued to text. I then phoned her for the first time and we talked a good thirty minutes. I then waited a day before I corresponded with her again, I sent out two messages, and with no reply.

I then started to worry, and messaged her a bit more. This morning, I sent her a message:

"I am sorry I've seem to come off as needy or clingly. I don't like texting, I preferably should've called you. Please reconsider, I still just want to simply meet you. I am profoundly hurt, by the fact I might've pushed you away. Would you like to go for a coffee or a walk?"

I have yet to meet her in person. My next plan is to wait lets say a week, and call her up. What should I NOT say in the conversation, if I get one? If not I will probably, move on and go onto other alternatives.

I have a Coolermaster 120mm UV LED Fan, and it came with these wide screws but, the fan itself doesn't have threaded holes they were just smooth, so you really had the press hard and turn hard to get them in properly, so inevitably I stripped all four of them. I was thinking about getting a new fan, since these aren't very powerful fans either. I am willing to buy a Grab-it removal kit for my screws, but I am worried about metal shavings from using the filing bit that comes with the kit. I can remove my motherboard tray, but I am still worried about metal shavings, what precautions should I take?

I am also think about breaking the holes with a screw driver so then I don't need to worry about metal shavings, but it doesn't seem that practical.

Have a nice day

Ken

The polynomial g(x) = mx^3 + nx^2 - x + 3 has a factor of (x+2). when g(x) is divided by (x-1) the remainder is 3. Determine values of "m" and "n"

So here is what I know.

Since g(-2) = 0 Therefore (x+2) is a factor.

Since f(1) = 3 Therefore (x-1) equals remainder 3.

Equation 1: g(x) = m(-2)^3 + n(-2)^2 - (-2) + 3 = 0

=> m(-8) + n(4) + 5 = 0

=> m(-8) + n(4) = -5

Equation 2: g(x) = m(1)^3 + n(1)^2 - (1) + 3 = 3

=> m(1) + n(1) + 2 = 3

=> m(1) + n(1) = 1

Now in order to find "m" or "n" I must be able to subtract the two final equations, but I have made a mistake somewhere or am not using the right method in order to be able to simply subtract the two equations.

So can someone please help me.

Yeah they were a excellent band, but I think there is to much airplay on the radio station I listen to, but still I kind of think they are a bit overrated. So reasons why you think they are or aren't overrated, and if I do agree with your answer I will pick it, plain and simple, just give a reason.

So this is for just down the road if I ever get my mom to buy a HD set. If I have say an Xbox 360, a Rogers HD Signal Box, and a DVD Player, and I also have a set of speakers, would I need an HD Receiver to make sure the signals are coming from these components into the speakers and HDTV, or can the HDTV do this by itself?

Thanks

Ken

I noticed this on the side of a Toronto EMS Ambulance. So what does it mean, and what is it used for.

I have an Asus P5N-D Motherboard with a on-board RJ45 port, I am running Windows XP Home SP2 32 Bit OEM on this machine. The connection is going from the Rogers Cable Modem and through a Linksys Wireless G Router to the RJ45 connector on the Asus P5N-D. My problem is that I cannot find connection on this one computer, while my Dell Dimension 4600 can, and so can my Inspiron 2200 (Which is what I am posting this message from can). The Networking drivers for the Motherboard are in folders and not in an .exe format, so what do I do about that

Thanks

Ken

Was the evidence manipulated by the police and prosecution to ensure Truscott's conviction? I need this ASAP

What are some parallels between the Iraq Conflict and the Vietnam War? Were there any false pretenses for the US to go into Vietnam?

Okay, in my grade 11 engineering class, we have been taking apart computers to see how they work, and then putting them back together again. I have had alreadly had experience with this so I knew what to take out and not tot take out. Most computers were second hand, and had 2000 on them, except for mine which was very, very interesting. I had a computer with a version of NT Server Edition, it also had a AGP 4x card, and Sound Card, SCISI Drive, a ATA Hard Drive, CD and Floppy, and surprisingly a Tape Drive. My teacher who is wonderful at her job, also surprised all of us since she only had boot floopies for 98 and not 2000. She wants us to find ways of installing and reformating the computer for 98. I downloaded DBAN but she wants a reformat not a wipe, so how will I reformat the NFTS drives to FAT 32, and what is the easiest possible way of doing so. Also since these are second hand, mine has a persons account on it, and she and I can't get a run box for pass reset.

Thanks

Ken

Today in my Grade 11 Engineering class, we had to solder wires to LED's, and me a friend of mine were using the same station which had a solder in a plastic container, while another station had a new packaged coiled solder saying that it was Lead Free, while the plastic container only said AI on the bottom of it, and that was all I could see, since it was a clear plastic container. Now we were soldering and me and my friend were getting a lot of fumes from this solder, while the other station right next to us had not very strong fumes. Our station was located right infront of an open window. So me and my friend had been soldering for about 10 or 15 mins. I asked my engineering teacher if she knew if it was lead solder or not, but she said she didn't know, and I then went out to get some fresh air, and to clear my nasal cavities of the fumes. Now I am just wondering if the solder is lead, would 10 or 15 mins cause any lead poisoning, or will it just broken down. What tests are there?

Today in my Grade 11 Engineering class, we had to solder wires to LED's, and me a friend of mine were using the same station which had a solder in a plastic container, while another station had a new packaged coiled solder saying that it was Lead Free, while the plastic container only said AI on the bottom of it, and that was all I could see, since it was a clear plastic container. Now we were soldering and me and my friend were getting a lot of fumes from this solder, while the other station right next to us had not very strong fumes. Our station was located right infront of an open window. So me and my friend had been soldering for about 10 or 15 mins. I asked my engineering teacher if she knew if it was lead solder or not, but she said she didn't know, and I then went out to get some fresh air, and to clear my nasal cavities of the fumes. Now I am just wondering if the solder is lead, would 10 or 15 mins cause any lead poisoning. What tests can I take. I was diagnosed with ADD at 9.

Will the Ultra Black Aluminus ATX Mid-Tower Case with Clear Side be able to fit the I/O Panel of a Asus P5N-E SLI Motherboard

THe number of mutual funds in Canada, M, is modeled by the equation M =460(1.19)^n, where n is the number of years since 1989.

a) When will the number of mutual funds reach 10,000. Answered I divided 10,000 by the equation 460(1.19), and recieved 21.73.

b) How many years will it take for the number of mutual funds to triple. I need to figure out the exponent for this one.

The calculator I am using is a Texas Instruments TI-30X IIB, and it is just a scientifc calculator.

Thank you to all.

If I were to get a USB TV Tuner or TV Tuner card for my PC, would I have to pay for basic programming. My mom and I already have Rogers Digital Cable with their cable terminal for downstairs, and my computer upstairs is connected to the internet via Rogers High Speed Internet(cable). So if I were to get a TV tuner for the PC, and splice a perfectly clean cable connection to my computer, since modems just use the data from the cable signal. Would I have to tell Rogers that I am going to use a TV Tuner, and want basic cable for my room? Would I have to pay extra(or at all), and would the digital service be affected, and how easy is it to do such a thing? I am just thinking about it.

I am doing an English Essay on Ethnocentric schools, should/should not be created by the Toronto District School Board. I am on the negative side saying that they shouldn't.

The Thesis

Because there is high percentage of black students not being able to graduate in Toronto high schools, the TDSB should not exclude them from public high schools, but should use other alternatives toward helping them make the transition onward.

I need to know this for my American History course.

Thank you

Ken

Intel® Core™2 Duo Processor E6850 (4MB L2 Cache, 3.0GHz,1333 FSB)

Intel® Core™2 Extreme QX9650 (3.0GHz, 1333FSB, 12MB L2 Cache)

What is the difference in performance other then more Cores, and a difference in cache.

How many hours does the rush last?

I can speak to my grandmother and my mother in Estonian, but I haven't had a chance to learn how to read it. I don't have time.

Mina räägi eesti keelt minu ema, ja vanaema ga.

Ma ei saa lugeda eesti keelt.

Mina ei ole se aaja.

So, what is a good book to read on how to learn Estonian