Yahoo Answers is shutting down on May 4th, 2021 (Eastern Time) and beginning April 20th, 2021 (Eastern Time) the Yahoo Answers website will be in read-only mode. There will be no changes to other Yahoo properties or services, or your Yahoo account. You can find more information about the Yahoo Answers shutdown and how to download your data on this help page.
philip.villagran
1984 honda magna v-30 cam shaft issue anyone know motors?
I have the cam lined up,and all others in their spot. but the last one is giving me problems. When I put the cam holders on, and tighten them down, I can only rotate the motor almost 180 degrees but not quite.
When I loosen the cam holder it turns freely, What can be causing this issue. I have recently replaced a valve rocker arm, but totally stumped. never have I seen this problem before.
1 AnswerMotorcycles1 decade agohonda magna v-30 500, 1984..any experts?
I have a 1984 honda magna v-30, and replaced the lower clutch seal inside the motor. I have tried starting this thing that ran fine before, but no go. every so often there was a puff of smoke out of the carbs, but no fire. I have spark, And fuel, and the breather is on. The motor is dual overhead cam, the book sais there is no way to screw up the timing, but what if the lobes on the camshaft werent't exactly the way they were when it was taken apart. I have had the motor out three times, and before I go nuts.., I need real help. someone who knows exactly what is going wrong. not just a long shot. I would appreciate the advice , cuz this is my only way to get around, and My freedom loss is significant. PLEASE HELP< from one bike rider to another.
2 AnswersMotorcycles1 decade agoI have a 1984 honda magna that needs an oil seal,can you tell me what the number would be?
this oil seal is in front of the front sprocket. the clutch pin goes thru this seal. I have orderd 3 different seals,and they are not the right ones.
left side in front of the front sprocket looking toward the tire,not the cover or hydraulic clutch housing on the side cover. I am getting so sad, this is summer and I should be on my ride. but if I don't get this seal I dump oil "liquid gold" all over the ground.
2 AnswersMotorcycles1 decade agoI have a 1973 mercury 40 horse outboard motor. I am trying to install an ignition switch,what goes where ?
I am trying to wire an ignition switch in the assembly, but I have no idea what wires go where, old ignition wires were too deteriorated to know color,but I can trace them, the ignition is round with 6 posts only 5 are used. please help me?
2 AnswersBoats & Boating1 decade agoI have a 1984 honda magna v30 starts and runs fine, but bogs after 1/4 throttle. what do I do?
1984 honda magna v30 starts and runs at idle smooth,but when throttle is used past 1/4 throttle, it bogs and stalls. I have tried pretty much everything, any magic cures?
4 AnswersMaintenance & Repairs1 decade agowhere,and how do I sell My wood carvings on the internet?
I have carvings I do but,where would I sell them on the internet besides ebay and craigs list? somewhere i would get what they are worth
7 AnswersDecorating & Remodeling1 decade ago