1989 Honda prelude door wont shut right, help?

The bushings are shot in the hinges.

Go to a parts tore and get yourself some hinge pin and bushings they don't cost much and then find someone to put them in.

start up up by using checking the timming belt your self by using beginning the oil fill cap and finding indoors on the comparable time as somebody cranks the engine in case you be huge unsleeping the cams and the lifters/cam followers moving the the timming belt isn't broken. there is the possiblity that it jumped timming and if it did you would be able to analyze the timing by using removing the valve cover and seeing if the marks line up. if the belt keeps to be good and the cams are moving learn for spark by using removing a sparkplug twine and putting a screwdriver contained finally then lay the screwdriver down so as that the steel is close (approximately some mm) to a floor alongside with any steel ingredient of the motor vehicle as quickly as you would be able to hold it you would be able to correctly be ok the cope with of the screwdriver is unquestionably insulated then have a chum crank the motor vehicle and be huge unsleeping as quickly as you have spark. in case you dont then you definately ought to replace your ignition coil and ignitor(ignition modual). additionally learn your oil and coolant to verify if it has blended if it has the oil would be like milk and that meas which you blew your head gasket. want this helps some