How to clean the black gunk off of 45 yr old real wood custom kitchen cabinets?

Remove the handles ...Make a paste of ammonia, dish soap and baking soda and apply it to the dirty areas. Let it sit till it drys, about 30 minutes. Then simply rinse it off with a warm cloth or towel.

If the grime has sat there for ages the finish will more then likely be compromised under the gunk. Be sure to use a furniture polish or preferably an oil like lemon oil after you clean them. I would not use TSP on the wood cabinets it will de gloss them if the gloss is already off the cabinets and they are bare wood under the grime may turn green, brown or gray on contact with T.S.P.

No matter what you do you may find that those areas need to be refinished or reglossed - If this is the case...Remove the doors and bring one to a qualified paint shop to determine how to match the sheen of the finish with what products. Most likely you will be applying varnish to the spots after they are clean. Let the varnish dry and harden in a sunny spot for several DAYS before putting them back in the kitchen.

I just found a site with thousands of downloadable woodworking plans, it s really great. You can check it out here ( woodworkingplans.kyma.info ) Here is an honest review : If you want to start a woodworking project, you need all the necessary information, including schematics, blueprints, materials lists, dimensions etc. That is where TedsWoodworking comes in. The plans are clearly drawn and there're step-by-step explainations of how the plan should be done and put together. There are several other sites whose collection of plans have the dimensions totally wrong without any indication of parts lists, material lists or the tools needed. If you're one of those people who have bought plans like this in the past, TedsWoodworking will change your perception. In Ted's Woodworking you will get everything you need: Diagrams which are detailed with a full set of dimensions, step-by-step instructions how to start your project and the necessary materials for that particular project. All the woodworking tools you will need: If you are a beginner or have done some woodworking you will find these plans easy-to-follow as the instructions are very clearly written. The woodworking plans are straightforward so they are not complicated at all. Even if you are a total newcomer to woodworking you will simply be able to master all the techniques that are needed and the woodworking skills very quickly by following the concise and clear instructions. Another thing which is so great about these woodworking plans is that there have been some videos included and there are some to guide you in how to build benches home furniture dog houses bird feeders sheds and much much more. There is also a lifetime member acess included in the package and you get these extras for no cost to you as they are free with no additional charges at all! This alone is worth the entire price for TedsWoodworking. Ted Mcgrath is a very dedicated and experienced woodworker who knows what he is talking about when it comes to woodworking and DIY projects s he has been a woodworker for many many years. There is only one drawback that we could find and that being with 16,000 woodworking plans you are bound to get some which look a little disorganized but that is understandable as it is very difficult to place all these plans into their proper categories. Secondly, it might take you a little longer to do the downloads on because of the size of them. But the members area include an option to upgrade to the DVD so you can save time on downloading. I've been a carpenter for almost 36 years, and I haven't found anything like this for less than 10's of thousands of dollars.Here's the bottom line: If you are planning to start on your woodworking project, this isn't something you SHOULD use, it's something that you would be insane not to. Check the site: ( woodworkingplans.kyma.info )

The first thing I'd go for is a steamer and a supply of microfiber cloths. That will be your least damaging solution. Next would be Simple Green and the microfiber cloths. Spray the Simple Green (mixed 60% water and 40% cleaner) on, let it soak a bit and wipe with the microfiber cloths, rinsing frequently. These cloths wipe more efficiently than anything else.

Do not use anything even mildly abrasive or you will be taking the finish off. And it's possible that all the years of having that **** on there has damaged the finish anyhow but why make it worse. No nylon scrub pads, no Mr. Clean erasers, they are all abrasive.

The Simple Green is non-toxic and biodegradable. Smells nice too and won't tear up your hands. I'd let the cabinets dry well (at least overnight) and then give them a couple coats of Scott's Liquid Gold. It's a oil that works wonders on woods. Even Walmart has it. They have the Simple Green too but it's usually in the automotive section.

And it's going to take patience and time. There is nothing that will take it off in one swoop. If it did, it would be so caustic that it wouldn't be safe to use.

The inexperienced woodworker and the very experienced person will be able to do these projects without any difficulty https://tr.im/GuideToWoodworking

Each and every one of the thousands woodworking plans and projects which are available are so well written so that even if you've never tried Woodworking before, or if you have 2 left hands, you would find woodworking a breeze

Just some hot soapy dish water and one of those green scrubby pads. they feel rough but won't scratch.maybe a little degreaser like the green stuff or orange stuff, the are non toxic and safe on almost everything. If you want to go for a nice even shine the remove the handle and spray on a coat of Poly urethane. it comes in a spray can and is really easy to use. all your cabinets will look like brand new, just make sure they are good and clean first so you don't seal the dirt into the wood.

Here are literally thousands of organized woodworking projects in a members area and all you have to do is get them off your computer any time you want. Go here https://tr.im/ManualOfWoodworking

There are thousands of plans so decide which one you are going to tackle next. The choice is yours to make so just click on the proper button for the specific project and then they are right there for you to pick one. The diagrams and instructions will be right there in the computer for you to access at any time or if you prefer you can print them out.

Go to your local hardware store. They have a solution that takes no time at all. There is a product called "GUNK REMOVER" that works very well. Who would have guessed. You can also save some money and 1st try some warm water diluted with a bit of viniger.

june, try some tri sodium phospahate or ( TSP). you can purchase this at any major hardware store. using rubber gloves, use a soft scrub sponge and rub away any grease build up- this should help on the gunk removal.

This is one of the best collection of plans I’ve seen: https://tr.im/GZKrW

There is enough variety of projects in here, big and small, intricate and simple, and you can pick out new ones as you progress in your woodworking abilities.

It’s a great feeling knowing you made something by hand. It’s always fun to show off your craftsmanship, and ladies love it too!

1st wash the wood with Murphy oil soap (dilute as directed) and thoroughly dry

then apply Howard Restor~A~Shine Burnishing Cream super fine

you'll need a lot of "elbow grease " to have to keep rubbing and changing the cloths as they get filthy

If you cant find Howards at your local hardware store ? ask a employee what do they recommend- Formbys is decent just takes longer with slightly decreased results