Yahoo Answers is shutting down on May 4th, 2021 (Eastern Time) and beginning April 20th, 2021 (Eastern Time) the Yahoo Answers website will be in read-only mode. There will be no changes to other Yahoo properties or services, or your Yahoo account. You can find more information about the Yahoo Answers shutdown and how to download your data on this help page.
Trending News
New wheel bearing and still noise?
I have a 1997 2wd 2.3 liter Ford Ranger and the front passenger side wheel was making loud noise and the wheel was pulling that way and I replaced the wheel bearing and a couple days later the same side is making that noise again and and pulling that way again. It has 4 brand new tires on it and the wheels aligned.
5 Answers
- steveLv 45 years ago
I hope you replaced the bearing race as well...If not, the race may have spun in the hub. I would just get a new rotor and hub assembly, and another set of bearings. Spend the extra dollar for some good grease, make sure you " pack " the bearings good.....And off you go.
- 5 years ago
make sure your brakes are bled properly then and check your ball joints by jacking the car up and grabing the tire at the 6 and 12 oclock angles and wiggle it up and down and do the same with the 3 and 9 oclock angles. if the tire wobbles then you need new jointss
- MichaelLv 55 years ago
It is possible that new bearings can go out that quickly, I would take the bearings back out and return them for warranty and inspect the spindle very closely.
- How do you think about the answers? You can sign in to vote the answer.
