Midhun M

Gf secretly texted a new guy friend of hers for a month and lied meeting him one day because she was afraid that I'll get angry. She also said that the reason for texting him was that I was not able to understand her (I got angry on little things) and because he was open and friendly to talk with. She regrets what she has done,and has stopped all kind of communication with the person. She says she cant live without me , so do I. It really shocked my mind and I find it hard to forget. How can I forgive and trust her again?

GF secretly texted (calling too) a new guy friend of hers for a month and lied to me meeting him one day because she was afraid that I'll get angry. She said that she initiated and got close to that person because he was very free and open talking to her , and that I was getting angry on small things and that I was not able to understand her. She ensured that it was just friendship and nothing more , but what hits me is that she lied to my face all whats happening , and I cant digest her getting close to a stranger . She regrets what she has done,and has stopped all kind of communication with the person. She says she cant live without me , so do I , but whats happened has pulled me down a lot. How can I forgive and trust her again?

Which one would be a better shot ?

SAMSUNG ATIV BOOK 2 NP270E5G

Intel Core i5 3230M 3.2Ghz TurboBoost

8GB RAM

750GB HDD

AMD RADEON HD 8750 2GB Dedicated

LENOVO Z410

Intel Core i5 4200M 2.5ghz

6GB DDR3 RAM

ITB HDD

nVidia GT 740M 2GB Dedicated

I would also like to know which one would be good for gaming. I mainly play games like GTA 4 , COD etc.

Will I be able to play GTA4 at medium high sets ?

Thank you.

My doc (endodontist) gave me an appointment for the R.C.T tomorrow. He told me that the tooth is dead and that he spotted an abscess in the X-ray. The tooth actually chipped off about 7 years back. Is the procedure going to be painful ? Ive heard that the local Anastasia would be painful in the front tooth , but my doc told me that it is no more than an ant bite. I am really anxious to know about it. He did not prescribe me any antibios or painkillers. Would that cause the Anastasia not to work ?

Thank you

My doc (endodontist) gave me an appointment for the R.C.T tomorrow. He told me that the tooth is dead and that he spotted an abscess in the X-ray. Is the procedure going to be painful ? Ive heard that the local Anastasia would be painful in the front tooth , but my doc told me that it is no more than an ant bite. I am really anxious to know about it. He did not prescribe me any antibios or painkillers.

Thank you

if (a + 1/a )^2 = b

then what is (a^3 + 1/a^3) in terms of b ?

One of my front tooth got chipped off around 6 years back. I did go to the dentist the same day , and he told me to have the root canal done since he spotted an abscess . But I denied to do it . In the past 6 years , I've had several gum boils , but since the last 2 years I haven't seen any. Tooth ache's are rare . I do have a tingling effect behind the chipped off tooth spreading the upper jaw. And also , whenever I have a tooth ache , I experience the pain in the adjacent tooth too , the pain is almost identical for both, don't know why . I would like to have the root canal done , and so my questions are :

Would it be painful or more painful actually since its been 6 years which I think would be a rare case.

Would there be any other complications compared to normal root canal since its a front tooth ?

I am really anxious to know about it , and also I am a person who is really scared of such surgeries . I hope they numb me really hard !

Thank you

Identify if I use the typedef statement like the one below , will it produce an error ?

Typedef char str

//And then using it to create a string ,

str fun[80] ;

Or

Typedef char str[80]

str fun ;

Which one is right ?

Should I mention the size of the string in the typedef statement or is ok if I do the way i did above ?

Here is the question :

Solve : Integral of e^2x {(1+sinx)/(1+cosx) }

Is the law used for e^x applicable here ,

The law states that if one can write an integral in the form of e^x { f(x) + f'(x) } then its integral is e^x.f(x).

Thank you.

If a , b , are unit vectors such that a.b = a.c =0 and angle b/w b and c is pi/6 . Prove that a = 2(b x c).

Assume that All the vectors mentioned above have the vector symbol above them.

Hello ,

Last week , after starting the car , i had found a problem.

I could not shift to the 1st , 2nd and the third gear , rest was fine.

But sometimes , the second and third works .

I took it to a dealer , he told me there is some problem which he did not explain, and also told that he will fix it for now.

After the fix , the first gear would not engage , but if i apply force holding the gear in first position , it would engage but some times grind. The second gear has become very tight and the third is not tight but would not engage at times.

What could be the problem ?

Please read all the fields written in the photo below .

Thank you.

http://s13.postimg.org/3tl0g89w7/iqaa.jpg

I need the output for this question and also the explanation for the usage of global variable i.e where it is used and how its value changes.

Void d(int&x , int y , int z)

{

a+=6;

y*=a;

z=a+y;

cout<<x<<'\t'<<y<<'\t'<<z<<endl;

}

Void main()

{

int a=15, b=5;

d(::a,a,b);

Cout<<::a<<'\t'<<a<<'\t'<<b;

}

I recently had my gasket changed . But now , when the car is started , the engine bogs , rpm drops and it goes off , the next time the car wont accelerate , in fact when pressing the accelerator the rpm first goes down , bogs and then rises slowly . when I accelerate slowly there is not much problem of bogging.

Once I get it to run ,the next problem comes out. When braking and holding the clutch to go down from some gear , the car goes off after pressing the clutch i.e rpm drops to 0 and the steering as well as brakes get locked. And also when holding the clutch while changing gears , the rpm goes down below 1000 and starts shaking and the car almost goes off . What is causing this ? Engine oil ? or anything else ??

And also , the check engine sign is always on !

Thanks

Last week my car didn't start because it had a blown gasket due to heating. Got it replaced today , and out of the workshop , i found that my car did not accelerate as before , i.e it takes a bit time to power up above 1500 Rpm and then goes fine. Also when idle, the rpm goes below 1000 and rises a bit but when lowered it kinda starts to stall. While i exited a highway to a local road today , when i braked while i was on 4th gear , the car went off before I could press the clutch !! And then the steering wont move and cannot press the brakes too !!! I had to catch the hand brake to stop the car....,what actually is the problem. Thanks for any help !

My car ran fine today morning. It had an oil leak 2 days back....but it went off after replacing the filter. But today while I was driving , the car stopped when I was about to stop in a signal. When I opened the bonnet , I saw a bit smoke coming out and also a false smell. My engine started up but not as usual , it took a little time to start up and gain power. What might have happened ?

Today morning before starting it showed roughly half in the dipstick..... i saw a kind of orange liquid splashed all over the pipes surrounding the engine....after the smoke , i came to know that my coolant level was 0 !!!

After keeping the car off for around 5 hours, i tried to start the car , but i hear only sounds and my car does not start. I fully poured water to the coolant container........but when I start , along with the sound , i found that my coolant tank was emptying very fast.....each time I start the tank empties from the side through 4 holes , but when i pour it back , it doesn't leak ?? Any solution ?

My car ran fine today morning. It had an oil leak 2 days back....but it went off after replacing the filter. But today while I was driving , the car stopped when I was about to stop in a signal. When I opened the bonnet , I saw a bit smoke coming out and also a false smell. My engine started up but not as usual , it took a little time to start up and gain power. What might have happened ? I've seen oil dripping below. How can I repair it ???

I've got an ATI Radeon HD5450 1GB DDR3 graphic card.

Its a fan without a fan. The temperature at idle is about 48-55C and at load is about 69-76C,

Is this temperature stand able for the card ? What is its max capacity ?

My PC has a Max power output of 305w. I have an ATI Radeon HD5450 1GB DDR3 graphic card.

If I play the game at medium settings , how much will this card consume ? If it exceeds the power limit , what will happen?

I am planning to get the MSI nVidia Geforce 210 1GB.

My motherboard is of Dell(Dell Dimension 9150).

Inside on the psu , it is stated that the max output Power is 305W. Will it suite in this P.C ?