james_spader_jr

I am looking for a song that i recently heard that is a pop song sang by a female vocalist in which the chorus are the lyrics hey hey hey, heeeeey! Strong accent on the last hey. I'm sorry there is not much more to go off of, and no it is not bananarama hey goodbye, but the song sounds like it may be an 80's song. Any help would be appreciated.

I just bought a 2007 Dodge Ram with the 4.7L V8. When I drive the truck and turn on the HVAC (heater) the condensor fan comes on. At first I thought it was attached to the radiator or that it may be there in line just to cool some other part of the trucks coils, but I is really cold outside and the thing is still running. Is this part of how the sytem operates or is there something wrong such as a bad relay or something? I would really like to know, since these fans do wear out and I really want to save it for sunny days where it may be over 100 degrees here. Anyone have a clue about this? Thanks for the feedback, this is my first dodge.

My dad and stepmother were in a non-fault car accident caused by another party. All decendants have been trying to search for a working will for the estate, and also are looking to deal with the insurance companies. A working will has not been found. Rather than going to probate I am working with one of the children of my stepmother to help settle everything fairly to avoid going to probate. I think we can all come to an agreement on these things I just wanted to know if there are any pointers. I have one brother, and she has two sisters and a brother. Both me and the sister have deemed ourselves executors I for my dad's estate and her for her mom's. If anyone has ever experienced this and came through without probate I would appreicate any advice. My dad worked hard for 20 years supporting this woman he loved and it would be a shame to see all their assest not go fairly to the family.

CC

I have a clothes washer (Maytag) that is less than 6 months old. Recently I have been noticing that the concrete on the floor had a small puddle of standing water under it whenever I wash clothes. I looked at all the connecting hoses and they do not appear to be leaking. Could the humidity in the air be causing the tub to sweat and leak onto the floor, or is it an actual leak?This is the first time I have had a machine enclosed in a hot building where it is very humid.

I have a 1964 Gibson SG Special, that is all original, no repairs, only the tuners have been replaced with oem tuners. I still have the original tuners, no drill holes or major cosmetic issues just small scratches. I have been considering putting the guitar on ebay or some other source of online trade. Anyone have any tips on using Ebay or another service to get the maximum amount out of my instrument? I have quite a bit invested in this instrument and I know it is worth much more than I paid for it to the right person.

Thanks,

CC

I am looking for a laundry service that will press shirts at a reasonable price. I have no qualms with washing them myself, just do not have the time or will to iron all my shirts and pants. Any suggestions?

There is a song that I heard a few years back ( a rap song ) that has the lyrics "let me up in them guts" The song sticks in my head but I can't remember. It may not be worded that way exactly, but if not, close.

I live in an area where there are a lot of people who are inconsiderate. About half the population has a loud car stereo, and they use them at all hours of day and night. I have to sleep some time. I myself have invested in car stereo, but I go for sound quality not nessesarily quantity and am considerate of other people. Have any of you faced this sort of sitation and came up with creative means of dealing with these inconsiderate douchebags? I am curious because I would like to curb this, but don't want to go to jail for doing something that goes out of bounds...Thanks for your input.

Every music store I go to wants to charge exactly the same amount, 175 dollars to get my guitar refretted. I find it kind of odd, that 4 different people make the exact same quote. Is there some sort of conspiracy or something going on amonst luthiers? I know it's worth it because of the skill level involved, and the cost of a mistake, but they all charge the same?

I am trying to figure out how many pounds of force (propulsion) is provided when a certain pressure of liquid goes through an opening-volume.

This question I tried to figure out with one of my friends the other day who is good at math, and he couldn't help me write it. The question I had was, if I trade in my truck for a more fuel efficient vehicle, how many miles would the vehicle have to drive to pay for itself in gas savings. We were assuming the vehicle was 14000 dollars, and also we were assuming that gas was 3.00/gallon. My truck gets an average of 17 mpg, the car I was looking at gets 36.

I have a '99 siverado with close to 150k miles on it. I have always liked the truck but it has been nothing but one small headache after the other. Nothing major ever breaks down, but I have replaced

1. Brakes-new pads all around, and new rotors/ebrake pads on back

2. Hub Assembly-replaced fronts both 2X

3. Battery (2X)

4. Spare Tire Carrier

5. Window regulator passenger side.

- Other than that, the radiator has a pinhole leak in it, and the transmission sometimes hard shifts for no reason. I want to get a newer truck in the next six months with lower miles on it and am thinking about changing brands. I need something that gets pretty good gas mileage for a v8 or v6 and need an extended cab. I also need something that rides fairly well as I drive anywhere from 30-100 miles a day. Also I need something that will not produce headaches, and will get me a good value for what I pay. I usually don't expect to replace a vehicle until it has close to 200k miles on it, don't think this one will make it that far. Can some folks on here with newer model trucks give me your opinions?

Thanks,

CC

I am in arkansas and would like to get lasik done on both my eyes. I have vacation week after next and (I think) the money to do it. Has anyone had the surgery in either AR or OK and had good results? How much does the surgery cost? Who is the most reasonable, still providing good service? How long will I not be able to see? Any other specail considerations?

THanks,

CC

I have been seeing an overabundance of pollen here in the last few days on the ground. What happens when all this pollen gets washed away? What does it do to the river system and waterways?

I am planning on trading my truck in soon. I am very sure it will be worth a lot less. Can I write off the difference in what it was worth and what it trades for as a loss on my 2010 taxes?

I have a 2000 silverado 5.3 V8, and between oil changes I have to put water in the overflow, because the coolant is going somewhere. I always check under the truck and there is never anything on the ground. While running I can almost always smell antifreeze in the engine compartment which is disconcerting. My dad said that It may just need a new cap. Does this sound right, is there a way to check for leaks when you can't see antifreeze going anywhere? Please someone help, the truck runs fine I just would like to fix this before it becomes a bigger deal than it is.

Thanks,

CC

I was thinking about the technology in their speakers and thinking about adapting it to work on a guitar, if I could figure out how they do it. I like the idea of getting a guitar to sound "larger than life" sort of like bose speakers do.....

I would like to build a guitar with either a neck-thru or set neck configuration. I have been watching several videos of people doing this and have some woodworking tools. I am mainly concerned with the tools required to dress the fretboard and apply the frets. I would like to be able to build a guitar from scratch, minus the electronics. Can someone that has experience give me a whole list of tools to do this right and what their purposes are?

Thanks,

CC

I had autocad in college as part of my degree and would like to get a copy for my home computer, just to make sure that I can retain these skills. I have always been into drawing/drafting so I think this is a program I could get in to. I don't want to spend thousands of dollars but would like to get a full version I can save on my computer that will function right. I also want a version that will be compatable with most CNC machines. Does anyone have a suggestion on which version is best for me, and the best way to get ahold of this for home use?

Thanks,