ibanez

i put a new screen on my phone as i was doing this i guess i damage the LCD or the Digitizer terminal, so this is what the shop said. So would that cause it to not power on? and is there a way to fix it? When i plug it in the phone will beep every couple of minutes. Oh i cant see and damage to the terminal.

the tranny is from a 94 camaro its a t5 borg warner will it go into a 91 camaro with a v8? would changing the bell housing work??

want to up grade i have just a 10 bolt up front now i just remove my 10 bolt from the back and replaced it with a 14 bolt i know that the dana 60 would make one hell of a combo but im not going to be doing any really crazy off roading.. i think the only reason to put in the 60 would be if it going to cost the same as the 40

how do you check or add fluid in your rear end ? there is no drain plug on the cover ? and how much fluid do you put in? it a late 80's 3/4 ton 14 bolt chevy

when you put a lift on your truck do you to put new leaf springs or can i just use the same ones. 1985 1/2 ton gmc jimmy with 3/4 ton 14 bolt

how does it work and does it or is it just another scam

93 scottdale 2500 3/4 ton. yes it has my gear ratio and it has my six lug pattern

93 scottdale 2500 3/4 ton. yes it has my gear ratio and it has my six lug pattern

i need a rear end for my chevy 4x4 truck does it matter if that rear end came from a truck that was 2 wd and what years match up for an 85 i read 77 to 91 and i read 82 to 94?

this is my first bait casting reel its a Abu Garcia® BCX Series my line keeps getting tango up inside the reel and i cant get a good cast from it i got to tighten my drag almost all the way to get a a half *** cast. is there a special to put the line on or is there something to adjust?

my puppy only pees and poop in the night time. i get up every night and let him out. what else should i do??? he's only three months and i know they cant hold it for a long time like a adult

how hard would it be too put a 14 bolt on and to add the right gears (3.73 is what in my 10 bolt)

how hard would it be to bolt up a 454 to my 700R4 tranny

i want to replace my rear end from a 10 bolt to 14 bolt how do i check to make sure the gear ratio are the same so i dont blow up my transfer case and what do to fix this.

i have a 85 jimmy lifted on 38's with a dana 44 front 700r4 with the 208 and a 10 bolt on the back. i want to replace my rear with a 14 bolt what needs to be done. i think the rear ends has the stock 2.73 gears in it. i know i can get a 14 with 4.10's. planning on getting 4.56 gears down the road

would it be cheaper to just replace my rear end or to just rebuild my 10 bolt. i want higher gears then what it has now (2.73) i would like 4.56 but could live with 4.11 i have a lifted gmc jimmy with 38's dana 44 in front w/ 208 and a 700r4

i have this jimmy that i just pick up and it has the stock rear end which has 2.73 gears the truck has a lift with 38s on it would it be better off to buy a rear end with higher gears or rebuild the one i have 10bolt i was thinking about the 14 bolt? and how easy is it to change out the axles ?

i have a 1985 gmc jimmy it has a 208 transfer case i heard they wasn't that good should i replace it with a 205

check all the fuses and the bulbs could it be in the steering column?

i have neons lights around my plates and i keep getting pulled over and being told they are illegal but never given a ticket for them. i just want to know the law no other comments.