?

Liking the game so far but there is lousy support for gamepads. The controls section of the menu only shows mouse/keyboard controls. There is very little information online because the game is so new. I am using an xbox 360 controller. How the heck do I get cooked meat off the cooking station. If I try the attack button it just destroys the cooking station. I have tried X,Y,B and A and none of them work. If you don't pick up the meat at the right time it turns to coal.

I believe Firefox version 64 was when they changed the cookie jar policy. Prior to this I was able to set firefox to delete cookies and browsing history on exit. It would retain cookies I wanted to keep such as my yahoo homepage so I wouldn't have to login every time. Now no matter what options I check it will not keep me signed in to Yahoo. Is this a Yahoo problem or a firefox problem? Supposedly they made some changes for better security but now I have to keep all cookies and delete them manually. This is a pain and in no way more secure since I have tons of cookies being stored on my computer if I forget to manually remove them. Firefox used to be good. Not so much anymore.

I am currently playing in creative mode and want to increase the ammunition slots for the auto turret. They are set at three slots of 500 bullets each. I have searched through all the xml files and cannot find anywhere how to increase the slots to whatever I want. There has to be an xml file somewhere that dictates the capacity of the slots.

I want to make sure I understand correctly. I am currently playing alpha 16.4. If I go into Steam and click on 7 days to die, properties, beta, it comes up with a list of alphas. If I opt in to alpha 16.4 does that mean that I can keep playing without losing my save game in the event of a major update? I do not want to lose all my progress and have to start over again.

I am playing the newest version (16.4) I think. I tried to cook a boiled egg. I had the campfire, cooking pot, wood for fuel, an egg , bottled water. I was able to move the wood to the selected area to light the fire. The cook selection is greyed out. What am I doing wrong. I cannot figure out the cooking in this game. There is not enough food and water in this game. I keep dying.

I am waiting for these to come back in stock. I am worried about buying one that might not be compatible with G SYNC. I am hoping to get one from EVGA. I found one in stock from Zotac and it didn't state anywhere that it was G SYNC.

I am getting ready to buy a monitor for my new computer build. I am currently using an Acer V223W. It is a 22" screen and I am using a resolution of 1280x768. This makes everything look extra big which is exactly what I want in a new monitor. I cannot see anything with high resolution on such a small monitor. I was considering a 27" 1440p but am afraid everything will look tiny. I could go to a 32" 1440p but there are really no name brand monitors this size that will go above 60hz. I was hoping for 144hz. This will be used for gaming on a high end computer build and graphics card capability is not an issue as I will be going with minimum of GTX 1080 but probably 1080ti. I also need to be able to read text when I am surfing the web. I could care less about more "real estate" on the screen. Most people are saying 1080p on a 27" screen doesn't look good. Keep in mind I am used to using a 1280x768 resolution and think it looks just fine. I am looking for opinions from anyone who is currently using a 27" 1080p monitor.

Also if I go with a 27" 1080p could I set the resolution to a lower setting for everything besides gaming and then set the resolution to full 1920x1080 in the video settings of the game?

Corsair has done a poor job of updating their website to reflect the compatibility with the new Z270 motherboards. Almost every item says it will work with the 100 series chipset and nothing says it is compatible with 200 series. I looked at the qualified vendor list for the motherboard I want to buy (Asus Maximus IX Code) and they have a random assortment of Corsair PSU's on the list. Is there any reason that the HX1000i wouldn't work if they have the RM1000x on the list? The spec's indicate that they both use an ATX connector. They are both modular. PSU's aren't specific to anything other than the connectors are they?

I am doing all the research for my first custom computer build. I have read alot about memory configurations but am still needing clarification. The motherboard I am choosing is the Asus Maximus IX Code. It is dual channel compatible. There are 4 memory slots on the board. I want to have a total of 32GB or ram. Is it correct that I would be better off to use two slots with each stick having 16GB instead of filling all 4 slots with 8GB sticks?

I dropped the initiates ewer and put it in a wash basin in my home. It kept moving slightly each time I came back to that room. Now it is gone completely. I googled how to add it through the console and it is supposed to be player.additem xx00A89E 1. xx is supposed to be either 02, 05 or 07. None of these work. Anyone know how to get it back. I am not going to reload a prior save.

I downloaded the legendary unofficial patch. I downloaded SKSE. I tweaked the memory block to 512 with the SKSE ini file. Apparently I am supposed to use the SKSE loader.exe. I now have three different shortcuts to launch the game on my desktop. The original one (I know I should not use this any longer). The one that was created after installing SKSE. The one that I created after tweaking the ini file.

If I use the SKSE loader.exe will I still be utilizing the unofficial patch as well as the extra memory allocation?

I signed up for an account on Nexus. I downloaded the file and it is in some odd 7z format. Hundreds of thousands of people have downloaded this patch. I can't find free software to use this 7z file format that works. The download manager doesn't work either. It tells me firefox can't open this type of content. Is it really this difficult?

As with most any piece of particle board furniture there are thin panels that are nailed to the back of the piece of furniture. In this case it is a computer desk with multiple back panels that are all attached with tiny nails. I am disassembling this piece before I move and would like to try to save the panels without damaging them. How do I successfully remove the nails?

My vehicle has no pre drilled holes in the front bumper. I would like to use the universal license plate retainers that look like a wall anchor. They expand once the screw is screwed into them. The problem is these have a square shape to them. Can these only be used if your vehicle has factory holes that are square shaped or can you use a drill bit. If so, what size?

I have ground nesting yellowjackets and I have been stung for the third time while mowing the lawn. I am going to set out traps and I also spray the holes I can find with foaming yellowjacket killer. The little bastards always sting me in the same spot. Right above the area where my 8" leather workboots stop. Baffles me how they know to sting above the leather. I thought of trying to wrap my legs with some kind of material that they can't sting through. Jeans are just too hot in the 90 degree weather so I always wear shorts. Any ideas?

I have found holes in my lawn that are the approximate diameter of a half dollar. They are perfectly round and do not have a mound of dirt pushed up around them. There are numerous of them in certain areas and they are all spaced apart about a foot. Sort of a crooked trail of holes. The grass is pretty much dead in the areas where the holes are. I have had moles for a few years but this is not indicative of mole habits. I believe the holes are too big and too numerous to be ground nesting yellow jackets. I don't think it is a skunk as a skunk cannot make perfectly round holes. I am thinking voles aka field mice, but do they make numerous holes like this? Any thoughts on what this could be?

Over the years I have clipped off the spider babies and put them in water and they always put out roots within a few weeks at the most. I have currently had one in water for over a month and no roots. It was on the mother plant all winter before I cut it off. Should I just throw this one away and try again? Do they ever put out roots after a month or more of being in water?

I can't figure out how to add a new tile to new tab tools. I recently deleted one that I no longer use and now there is a blank spot. There is an option in settings to add new tile but when I click on add it does nothing.

I have an average length penis but the width is much too wide at the base. Most every condom I see is tapered at the base so it will stay on tight. I tried one today with my girlfriend and it would not stay on. In my opinion, there is no condom that would be effective if your penis is cone shaped being wider at the base and skinnier at the top. Does anyone else have this issue and if so what do you do about it?