Yahoo Answers is shutting down on May 4th, 2021 (Eastern Time) and beginning April 20th, 2021 (Eastern Time) the Yahoo Answers website will be in read-only mode. There will be no changes to other Yahoo properties or services, or your Yahoo account. You can find more information about the Yahoo Answers shutdown and how to download your data on this help page.
Matt
Anxiety problem when eating?
For years now I've been plaqued by irrational anxiety attacks brought on by eating in public and around unfamiliar people. I want to work through it without medication but where do i start.
1 AnswerMental Health8 years agono start condition 1985 c10 electrical related?
1985 C10 305/700r4 this past week it started to click(solenoid would engage) but not turn over. a few then many turns of the key before it started. I replaced the ignition switch the one behind the dash not the lock cylinder. now it gets nothing reading on its voltmeter. and wont even click.
2 AnswersMaintenance & Repairs8 years agoNew Quadrajet stumbles under load and rpms are high with screw backed out?
Put it on 2 days ago, First test drive it worked perfect idle was a little on the high side. on acceleration it will start to stumble and lose power, most of the time. Ignition is not to blame. if i open the choke slightly it idles down perfectly but as soon as throttle is applied it raises back up
4 AnswersMaintenance & Repairs8 years agostarter problem 99 6.5l td?
Started grinding gradually this past week. now it won"t crank at all. The starter is fairly new and works properly when bench tested the flywheel looks good and so do the starter gears. i added shims until it was no longer touching the flywheel at all. Would my old c10(305) starter work. what else could be wrong?
2 AnswersMaintenance & Repairs8 years agoVery high idle on quadrajet?
I just rebuilt it for running rough sometimes and having a super high idle the next time. Now it's is racing away. I've checked for vacuum leaks with no success any thing else that could be to blame. choke is disconnected.
The vehicle is an 85 Chevrolet c-10 305/700r4
2 AnswersMaintenance & Repairs9 years agoNeed some help asking a girl out.?
Here's my scenario. There is a Cute girl around 17-18. She works at our local Winn Dixie Every time i see her she smiles at me. The other night i was across the store and she smiled and waved. Ever since then i can't stop thinking of her and I've never felt this way of a girl let alone anyone. I'm 19 6' 4" and attractive. However I've never dated a girl. Never even had a first kiss. I've away been one to push. away. I've thought long and hard and i have 2 options i really like. I was thinking of giving her a compliment and slipping her a note saying-
Hey,
My name is Matt.I hope that this isn't a little to much . I've noticed you for a little while now and you seem very sweet. I'd love to get to know you better. Of course as long as it's fine with you. my number is -----.
-Hope to hear from you soon
or talk to her a little bit then slipping her a my phone number
Please help me choose and pick an option and explain why or if you have a suggestion.
2 AnswersSingles & Dating9 years agoAirstream air conditioner not working?
The a/c unit in my 1977 31ft sovereign only works on the fan function when i try to turn adjust the thermostat it make a grinding and labor sound. This Trailer had been stored 8 years. Is there anything I can do or must i buy a new unit.
3 AnswersOther - Cars & Transportation9 years agoHow long do i have to let acrylic enamel dry before masking it off.?
The temperature is 50 degrees with a nason medium reducer. I just laid a coat of black for my stripes and i need to mask them off so i can paint the rest.
1 AnswerMaintenance & Repairs9 years agoLooking for a girl but i have no idea where to look?
I'm a 19 year old guy. I know i'm attractive. However when it comes to girls i'm just about clueless I've stayed away from them in high school yet now i'm beginning to feel as though i'm missing something. I've never been in a relationship nor have had sex. What are good ways of meeting girls cause i sure can't think of a way.
1 AnswerSingles & Dating9 years agoHow would you test brakes and usability on an junkyard axle?
I'm swapping out a bad 10 bolt 2:73 for a corporate 14 bolt full floating. I need to know how to test the brakes and the axle to make sure they work.
2 AnswersOther - Cars & Transportation10 years agoRear-end swap brake question?
I want to swap in a 14 bolt rear-end that has larger brakes than my current 10 bolt rear end. can i simply plug and play with the brakes or is it more complex.
5 AnswersMaintenance & Repairs10 years agowhat are the best and most efficient way to pollute.?
something i can do on a daily basis
5 AnswersConservation10 years ago700r4 problems. best answer will be chosen?
I have a 26 year old 700r4 that is 100% original. I was driving in drive for the first time in a while and it doesn't want to go above 60. the whole truck begins to vibrate violently. It seems as though it's slipping. I installed an edelbrock carburetor and never hooked up the tv cable. I just put the old carb back on and it's correct now but still does it. the engine is a 305/700r4 with 2.73 rear end
2 AnswersMaintenance & Repairs10 years ago700r4 issue. Urgent.?
I haven't used drive in a while and today i use it and it will not shift past 2nd gear, it begins to vibrate violently at 60. when i put in a new carb the end of last year i kinda jerry-rigged a way to put the tv cable on so i doubt its in the right geometry but is this causing it or is it more serious? Overdrive goes through all gears fine. also i installed a carb and never really hooked up the tv cable properly
3 AnswersMaintenance & Repairs10 years agoBurning oil on start up, Best answer will be chosen?
I've been curious on what has cause it to burn someone recently suggested the valve cover gasket. also i have a little pools of oil in the low spot on my intake manifold outside of the engine.
7 AnswersMaintenance & Repairs10 years agoIs there a waiting period for purchase of a shotgun in florida?
I'm gonna purchase a Benelli Supernova tomorrow. My concern is whether or not i have to wait a waiting period because the place i will be purchasing it is a distance from my house
1 AnswerOther - Games & Recreation10 years agoTrailer brake controllers?
I have an 85 c10 that is pre-computer, i just installed a gooseneck for towing now i need a controller what would be involved in installing one. i was looking towards a proportional trailer brake.
1 AnswerSafety10 years agoWould 1 ton springs fit without modification on an 85 c10?
My original springs are starting to sag and I want it much stiffer so its nose stays at a consistent height instead of bouncing.
2 AnswersMaintenance & Repairs10 years agomy alternator is putting out 70 amps(normal) but only 6.48 volts.battery is running at 12.68?
please help me find out this problem
1 AnswerMaintenance & Repairs1 decade ago1989 f250 wont start.?
I bought a 1989 f250 earlier today it started and drove fine but now it won't turn over. I did get it to start shorting out the solenoid. what do you believe is wrong?
5 AnswersMaintenance & Repairs1 decade ago